Not all cores being reprorted with rel. 4.30 running on a i7-2630QM chip

Started by ag014400, September 03, 2011, 09:36:29 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

ag014400

Hi

I have just installed the latest version on a new machine (Win 7 64 bit Home Premium), the install seemed to complete with out problem.

However, it is is reporting on only 3 cores (I would have expected to see 4 cores) and the GPU in both the Temperature and Graphic tabs, TThrottle seems to have found all cores when starting up.

Attached is the startup log, does anybody have any ideas ?

Thanks,

Dave.



03 September 2011 - 21:32:34 Driver installed properly. Driver Version: 2.3
03 September 2011 - 21:32:34 Driver regulator: active

Program version: 4.30 64Bit
Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit

Language: User: 2057 ENG ,System: 1033 ENU

nvidia: found 1 logical devices
nvidia: found 1 physical devices
nvidia: Temperature 48 °C, max Temperature 127 °C

nvidia: GeForce GT 540M

Vendor ID: GenuineIntel
Vendor: INTEL
HighestIntegerValue: 0000000D - Processor Signature: 000206A7
Misc. info: 03100800
Feature Flags1 1DBAE3BF
Feature Flags2 BFEBFBFF

Processor:       Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz               
Processor: Family: 6h, Model: 2A, Stepping: 7

TJunction read from CPU: 100  °C, TJunction using: 100  °C

Core Temperature: 74 °C, Raw Data: 881A0000
88160000,88160000,88140000,88140000,88160000,88160000,881a0000,881a0000,
88160000,88160000,88160000,88160000,88160000,88160000,88160000,88160000,
0123456777777777
This Processor has 8 cores and  2 temperature sensors.

BOINC:
boinc01.cern.ch_test4theory
www.worldcommunitygrid.org

fred

Quote from: ag014400 on September 03, 2011, 09:36:29 PM
I have just installed the latest version on a new machine (Win 7 64 bit Home Premium), the install seemed to complete with out problem.
Start the program regedit and go to HKEY_CURRENT_USER\Software\eFMer\TThrottle64\calibration
Tell me what you see core_delta 2 cores 8.
Close TThrottle and change them to the values above. A delta of 2 should give 2 cores.
But it looks like two cores share the same temperature sensor.  So a delta of 4 may also be right.

You can remove the whole calibration folder and start TThrottle again an see it it finds some more sensors.

ag014400

Hi

Many thanks for you reply.

Current reg. entries showed core_delta 3 and cores 8.

I rechecked the INTEL web site and the i7-2630QM is a 4 processor / 8 thread model but at this time I could not find mention of the number of temp. sensors.

When changing the core_ delta to 4, TThrottle reports now shows 2 cores + GPU and changing to it to 2, it now shows 4 cores (none of them identical) + GPU.

Your suggestion of deleting the calibration folder and allowing TThrottle to recheck the chip again produced a core_ delta set to 3.

Thanks,

Dave.

fred

Quote from: ag014400 on September 04, 2011, 02:56:44 PM
Your suggestion of deleting the calibration folder and allowing TThrottle to recheck the chip again produced a core_ delta set to 3.
I will check that, because 3 isn't a valid number at all.

ag014400

Hi

Some further info. for you, I thought I would reset the BIOS to set Hyperthreading off and this time TThrottle correctly found the following - core_delta 1 and cores 4.

Thanks,

Dave.

fred

Quote from: ag014400 on September 04, 2011, 11:03:34 PM
Some further info. for you, I thought I would reset the BIOS to set Hyperthreading off and this time TThrottle correctly found the following - core_delta 1 and cores 4.
I will prepare a new text version, if you want to try that one, great. ;D

ag014400

QuoteI will prepare a new text version, if you want to try that one, great.

Hi

Sure, that is not a problem, just give me instructions on what I need to do when it is ready.

Thanks,

Dave.

fred

Quote from: ag014400 on September 05, 2011, 03:13:07 PM
Sure, that is not a problem, just give me instructions on what I need to do when it is ready.
Go to  C:\Users\username\AppData\Roaming\eFMer\TThrottle\log
Remove all logs file if there are any.

Install version 5.10 http://www.efmer.eu/boinc/download_beta.html

Go to the expert tab and press Re-calibrate.
Wait for the calibration to complete and look in C:\Users\username\AppData\Roaming\eFMer\TThrottle\log.

The *.log file can be opened as a text file.

Email me everthing from: (email address can be found in the log tab, or in about).
Callibration, Start
to
Callibration, End

If possible with HT on and off. ;D

To all other users, you may send me a log as well, the more the better.


fred

V 5.10 works ok.
A small problem remains, there are some "ghost" temperatures, right after calibration.
Restarting TThrottle solves this problem.
So the next version should restart automatically.

ag014400

Hi

Thank you very much for your prompt attention and resolution of the problem.

Dave.