There is a new Beta version on the beta download page.
On the download page you can find all the changes made in this new version.
http://www.efmer.eu/boinc/download.html (http://www.efmer.eu/boinc/download.html)
There is some new text that is not yet translated.
Hi all,
1-The scalable graph, can show the throttle percentage of the CPU and GPU.
2-The graph colors are now fully user definable.
3-Extra rule "number" like if gpu number > 2 reboot, reboots the system if more than 2 cuda exe are kept in memory.
4-Added AMD/ATI graphic card support.
5-NVidia card support for 2x GPU cards like the 295 (tested ok).
6-Added debug logging for AMD/ATI & NVidia. <debug> Switch in the XML file.
1-Correctly shown in all my computers (x86 & x64 OS)
2-Correct, exchanged and working really fine.
3-N/A only one GPU
4-Now when available Temperature sensor, the temp. is correctly shown, that's the case of laptop that has not temperature sensor for GPU.
5-N/A only one GPU
6-How could be activated this switch??
still shown CUDA tab in AMD/ATI GPU computers.
really very good.
Cheers, Carmelo. ;)
Quote from: Corsair on June 29, 2009, 02:23:09 PM
Hi all,
1-The scalable graph, can show the throttle percentage of the CPU and GPU.
2-The graph colors are now fully user definable.
3-Extra rule "number" like if gpu number > 2 reboot, reboots the system if more than 2 cuda exe are kept in memory.
4-Added AMD/ATI graphic card support.
5-NVidia card support for 2x GPU cards like the 295 (tested ok).
6-Added debug logging for AMD/ATI & NVidia. <debug> Switch in the XML file.
1-Correctly shown in all my computers (x86 & x64 OS)
2-Correct, exchanged and working really fine.
3-N/A only one GPU
4-Now when available Temperature sensor, the temp. is correctly shown, that's the case of laptop that has not temperature sensor for GPU.
5-N/A only one GPU
6-How could be activated this switch??
7-still shown CUDA tab in AMD/ATI GPU computers.
really very good.
Cheers, Carmelo. ;)
6- The example in the 64 bit version was not updated: <DEBUG>1</DEBUG>
7- On all or only the ones that give a temperature?
Quote from: fred on June 29, 2009, 02:37:40 PM
6- The example in the 64 bit version was not updated: <DEBUG>1</DEBUG>
7- On all or only the ones that give a temperature?
Hi Fred,
6-Ok
7-no both of them,
the x64 gives the correct temperature reading and there is CUDA tab
the x86 there is no sensor and no temperature reading is shown, but CUDA tab is shown too.
Cheers, Carmelo.
Quote from: Corsair on June 29, 2009, 02:47:46 PM
Quote from: fred on June 29, 2009, 02:37:40 PM
6- The example in the 64 bit version was not updated: <DEBUG>1</DEBUG>
7- On all or only the ones that give a temperature?
Hi Fred,
6-Ok
7-no both of them,
the x64 gives the correct temperature reading and there is CUDA tab
the x86 there is no sensor and no temperature reading is shown, but CUDA tab is shown too.
Cheers, Carmelo.
7- Corrected. http://efmer.eu/download/boinc/test/TThrottle_1_6_3_amd.zip (http://efmer.eu/download/boinc/test/TThrottle_1_6_3_amd.zip)
Quote from: fred on June 29, 2009, 04:38:08 PM
7- Corrected. http://efmer.eu/download/boinc/test/TThrottle_1_6_3_amd.zip (http://efmer.eu/download/boinc/test/TThrottle_1_6_3_amd.zip)
Hi Fred,
working in x86, no CUDA tab shown as the GPU is AMD/ATI. :)
Cheers, Carmelo
A new pre release version 1.64
It is basically the same as 1.63, but hopefully solves a small memory leak in the graphic display windows and the small temperature window.
The alt tab entry of the small window is now gone as it should be.
http://www.efmer.eu/boinc/download_beta.html (http://www.efmer.eu/boinc/download_beta.html)