After update to 0.95, all previous History entries were erased. Newly completed tasks are displayed correctly. Was this behavior expected ???
Perhaps related to glenaxl's 0.93 issue (http://www.efmer.eu/forum_tt/index.php?topic=610.msg3133#msg3133):
Beginning with the Selection bar, Operation toolbar & "new" Graphic toolbar all on a single line, in that order, perform a normal shutdown (Exit) of BT. On restarting, the Graphic toolbar has moved to a new line :(
Not the end of the world, but mildly annoying.
Quote from: jjwhalen on December 23, 2010, 06:40:02 PM
After update to 0.95, all previous History entries were erased. Newly completed tasks are displayed correctly. Was this behavior expected ???
It appears that new History entries are also being erased after a normal shutdown/restart. This would make 0.95 Dead On Arrival.
Quote from: jjwhalen on December 23, 2010, 06:40:02 PM
After update to 0.95, all previous History entries were erased. Newly completed tasks are displayed correctly. Was this behavior expected ???
same for me, will see if when restarted happens again. :'(
Quote from: Corsair on December 23, 2010, 07:39:33 PM
Quote from: jjwhalen on December 23, 2010, 06:40:02 PM
After update to 0.95, all previous History entries were erased. Newly completed tasks are displayed correctly. Was this behavior expected ???
same for me, will see if when restarted happens again. :'(
Me too...
Transfer Tab, Numbers in Progress bar, size, elapsed, speed too aligned left instead of aligned to centre or right.
same in messages tab with number and time.
I reverted to V 0.94 as the latest Beta version.
Tomorrow will tell what went wrong with the history, it seems to be erased at startup. As no changes where made in this part...
So V 0.96 will probably be out soon with a fix.
Quote from: jjwhalen on December 23, 2010, 07:04:36 PM
Perhaps related to glenaxl's 0.93 issue (http://www.efmer.eu/forum_tt/index.php?topic=610.msg3133#msg3133):
Beginning with the Selection bar, Operation toolbar & "new" Graphic toolbar all on a single line, in that order, perform a normal shutdown (Exit) of BT. On restarting, the Graphic toolbar has moved to a new line :(
Not the end of the world, but mildly annoying.
The graphic toolbar is larger as it was, so it may give a problem in some cases. But that should only be once.
Quote from: fred on December 23, 2010, 09:17:34 PM
Quote from: jjwhalen on December 23, 2010, 07:04:36 PM
Perhaps related to glenaxl's 0.93 issue (http://www.efmer.eu/forum_tt/index.php?topic=610.msg3133#msg3133):
Beginning with the Selection bar, Operation toolbar & "new" Graphic toolbar all on a single line, in that order, perform a normal shutdown (Exit) of BT. On restarting, the Graphic toolbar has moved to a new line :(
Not the end of the world, but mildly annoying.
The graphic toolbar is larger as it was, so it may give a problem in some cases. But that should only be once.
I tried it multiple times (before reverting to 0.94) and Graphic dropped down every time after shutdown/restart. Even with all 3 toolbars on the same line, there is still approx. 7 cm of "empty" space on the line (on my 16:9 display) with BT in fullscreen. That is unless there is an invisible barrier on this line that the longer toolbar is crossing.
I know I tested this several times in v0.93, trying to reproduce glenaxl's symptom, both using polite shutdown and killing the .exe, and couldn't make any toolbar jump to a new line.
Anyway as I said, not the end of the world ;)
Quote from: fred on December 23, 2010, 09:16:01 PM
I reverted to V 0.94 as the latest Beta version.
Tomorrow will tell what went wrong with the history, it seems to be erased at startup. As no changes where made in this part...
So V 0.96 will probably be out soon with a fix.
Is this possibly something to do with
QuoteChanged: History, Transfers, Messages: Allow column header dragging.
???
Just a thought :-\
Quote from: jjwhalen on December 23, 2010, 06:40:02 PM
After update to 0.95, all previous History entries were erased. Newly completed tasks are displayed correctly.
Yep but it's almost worth it to have the column header dragging :) :) :)
There seems to be a problem 095 ignoring the application switch parameter which I have set at 60 minutes. Notice the timing on the message queue between the two applications.
Elements
4006 malariacontrol.net 23-12-2010 10:26 PM Restarting task wu_899_516_233958_0_1292955078_0 using openMalariaB version 649
4007 World Community Grid 23-12-2010 10:26 PM Restarting task nz505_00025_11 using hpf2 version 617
4008 malariacontrol.net 23-12-2010 10:28 PM Restarting task wu_899_516_233958_0_1292955078_0 using openMalariaB version 649
4009 World Community Grid 23-12-2010 10:31 PM Restarting task nz505_00025_11 using hpf2 version 617
4010 malariacontrol.net 23-12-2010 10:36 PM Restarting task wu_899_516_233958_0_1292955078_0 using openMalariaB version 649
4011 World Community Grid 23-12-2010 10:36 PM Restarting task nz505_00025_11 using hpf2 version 617
4012 malariacontrol.net 23-12-2010 10:38 PM Restarting task wu_899_516_233958_0_1292955078_0 using openMalariaB version 649
4013 World Community Grid 23-12-2010 10:43 PM Restarting task nz505_00025_11 using hpf2 version 617
Quote from: idahofisherman on December 24, 2010, 06:06:01 AM
There seems to be a problem 095 ignoring the application switch parameter which I have set at 60 minutes. Notice the timing on the message queue between the two applications.
I believe that would be nothing to do with BoincTasks...a problem with application switching would have to be in the BOINC client itself. Also please note that v0.95 has been withdrawn; you should revert to 0.94 ;)
Best wishes.
Quote from: jjwhalen on December 23, 2010, 07:04:36 PM
Perhaps related to glenaxl's 0.93 issue (http://www.efmer.eu/forum_tt/index.php?topic=610.msg3133#msg3133):
Beginning with the Selection bar, Operation toolbar & "new" Graphic toolbar all on a single line, in that order, perform a normal shutdown (Exit) of BT. On restarting, the Graphic toolbar has moved to a new line :(
Not the end of the world, but mildly annoying.
Try moving all bars around a bit an place them on the right location again.
I can't reproduce it.
Quote from: fred on December 24, 2010, 11:37:51 AM
Try moving all bars around a bit an place them on the right location again.
I can't reproduce it.
I already tried that before I reported it originally. Note that the symptom only occurs if the Graphic toolbar is placed third (from the left). If the order is changed to
e.g., Selection|Graphic|Operation everything stays in place. (Which of course is a workaround for the problem ;D)
Behavior is the same in v0.96. I also installed 0.96 on 2 remote machines with same results.
Quote from: jjwhalen on December 24, 2010, 05:27:26 PM
I already tried that before I reported it originally. Note that the symptom only occurs if the Graphic toolbar is placed third (from the left). If the order is changed to e.g., Selection|Graphic|Operation everything stays in place. (Which of course is a workaround for the problem ;D)
Behavior is the same in v0.96. I also installed 0.96 on 2 remote machines with same results.
I can reproduce it on one computer and that will be my development computer for some time.
The problem may be that the selection is a dialog of sort, that is scaled to fit properly. It may be a lot longer initially, forcing the others to move aside. ;D