eFMer - BoincTasks and TThrottle forum

BoincTasks For Window, Mac & Linux => Beta Testing => Topic started by: thebestjaspreet on August 25, 2011, 06:16:49 PM

Title: BT 1.1.8 History update takes very long
Post by: thebestjaspreet on August 25, 2011, 06:16:49 PM
I have set up the history update time to min 4 max 10 seconds but it is taking 2-4 minutes to update the history.If set up to report results immediately many a times it show the status in history as Missed. where as in messages it shows as reporting request completed .
Title: Re: BT 1.1.8 History update takes very long
Post by: fred on August 26, 2011, 06:54:01 AM
Quote from: thebestjaspreet on August 25, 2011, 06:16:49 PM
I have set up the history update time to min 4 max 10 seconds but it is taking 2-4 minutes to update the history.If set up to report results immediately many a times it show the status in history as Missed. where as in messages it shows as reporting request completed .
BoincTasks Settings -> History "Maximum update time", set it to 4.
The history should now refresh every 4 seconds.
You can just as well remove the check at "Smart mode", this will set the history to a always read mode.

If your tasks / computer is less than 100 it should not cause too much overhead.
Title: Re: BT 1.1.8 History update takes very long
Post by: thebestjaspreet on August 28, 2011, 03:34:20 PM
Yes,it did made sufficient improvement.Thanks