Ok Folks...been running very clean since I started running a few days ago!
Here are a few of my observations...
I don't mind the real-time polling of the temperature sensor.
Just don't let me see it displaying that fast in the utility... Ha Ha!
Fake it out for the user so they won't think the same thing...
At least bring the display updates down to once a second?
Look at that Temperature window jumpin' all around! Smilin'
I have had this line in the first slot of each of my logging blocks since I last rebooted.
What is "slot 18" all about? I only have four cores (8 CPUs).
CPU:1, GPU:0, PID:7044 (3) Slot:18 http://setiathome.berkeley.edu/ ap_06ap11af_B1_P1_00612_20110604_11517.wu
And another observation...choppy CPU utilization working with Boinc Manager.
I set the Boinc Manager to a MAX of 90% CPU usage before I went to bed last night.
I noticed a periodic oscillation in the (
CPU graphic monitor I have running in a Gadget...
The overall CPU oscillation seemed to be on a 60 second interval as per Boinc's checkpoint value?
If I set Boinc back to 100% CPU utilization then this oscillation smooths out to nothing...
And another observation...it seems CPU (1 & 2) are being picked on by somebody?
The heat levels are consistent across all (4) Cores. But CPU (1 & 2) are being throttled hard? maybe?
There is a SETI job assigned to each of the ( CPUs - so there is always work running.
But CPU (1 & 2) are only 25% utilized - even though the others are running at 75% or more.
Tthrotle has done its job well...the maximum Core temp has stayed at my 88C setting...
Now...if I suspend Boinc...watching all the CPUs fall back to zero...and go have a cig now...
All of the CPU temps drop down to 65C -> which is my normal base temp for this ASUS laptop.
(yes I know -> don't debate about the heat sinks again...this baby likes to run hot. Ha ha!)
I then un-suspend Boinc -> bang all CPUs scream back to 100% - reaching 88C in 20 seconds.
Then Tthrolle kicks in doing its job - but CPU (1 & 2) gradually drops to 25% over a few minutes?
The other CPUs get throttled back to 75-80% utilization and all temps smooth out nicely...
I am going to reboot to see if this abnormal behavior for CPU (1 & 2) goes away or not...
Note also I have Boinc set to suspend if I use more then 15% of the CPU for other tasks.
I do have about 50 websites open in seven other browser sessions -> idling away at 5% usage.
Boinc kicks in and suspends everything nicely when I start doing work in the various windows...
I am not ready to reboot quite yet - I still have a lot of work pending in those 50 windows.
So I will shutdown/restart Boinc and those 8 SETI tasks -> to reset their CPU affinity now.
No change after restarting the SETI tasks... I am shutting down the 50 websites now...
That seems to have fixed it! Strange? maybe two of the browsers were idling too fast?
Which brings me to another question?
When (or if) does Tthrottle - throttle NON-Boinc processes?
Thanks KraftR
Here are a few of my observations...
I don't mind the real-time polling of the temperature sensor.
Just don't let me see it displaying that fast in the utility... Ha Ha!
Fake it out for the user so they won't think the same thing...
At least bring the display updates down to once a second?
Look at that Temperature window jumpin' all around! Smilin'
I have had this line in the first slot of each of my logging blocks since I last rebooted.
What is "slot 18" all about? I only have four cores (8 CPUs).
CPU:1, GPU:0, PID:7044 (3) Slot:18 http://setiathome.berkeley.edu/ ap_06ap11af_B1_P1_00612_20110604_11517.wu
And another observation...choppy CPU utilization working with Boinc Manager.
I set the Boinc Manager to a MAX of 90% CPU usage before I went to bed last night.
I noticed a periodic oscillation in the (
CPU graphic monitor I have running in a Gadget...The overall CPU oscillation seemed to be on a 60 second interval as per Boinc's checkpoint value?
If I set Boinc back to 100% CPU utilization then this oscillation smooths out to nothing...
And another observation...it seems CPU (1 & 2) are being picked on by somebody?
The heat levels are consistent across all (4) Cores. But CPU (1 & 2) are being throttled hard? maybe?
There is a SETI job assigned to each of the (
CPUs - so there is always work running.But CPU (1 & 2) are only 25% utilized - even though the others are running at 75% or more.
Tthrotle has done its job well...the maximum Core temp has stayed at my 88C setting...
Now...if I suspend Boinc...watching all the CPUs fall back to zero...and go have a cig now...
All of the CPU temps drop down to 65C -> which is my normal base temp for this ASUS laptop.
(yes I know -> don't debate about the heat sinks again...this baby likes to run hot. Ha ha!)
I then un-suspend Boinc -> bang all CPUs scream back to 100% - reaching 88C in 20 seconds.
Then Tthrolle kicks in doing its job - but CPU (1 & 2) gradually drops to 25% over a few minutes?
The other CPUs get throttled back to 75-80% utilization and all temps smooth out nicely...
I am going to reboot to see if this abnormal behavior for CPU (1 & 2) goes away or not...
Note also I have Boinc set to suspend if I use more then 15% of the CPU for other tasks.
I do have about 50 websites open in seven other browser sessions -> idling away at 5% usage.
Boinc kicks in and suspends everything nicely when I start doing work in the various windows...
I am not ready to reboot quite yet - I still have a lot of work pending in those 50 windows.
So I will shutdown/restart Boinc and those 8 SETI tasks -> to reset their CPU affinity now.
No change after restarting the SETI tasks... I am shutting down the 50 websites now...
That seems to have fixed it! Strange? maybe two of the browsers were idling too fast?
Which brings me to another question?
When (or if) does Tthrottle - throttle NON-Boinc processes?
Thanks KraftR