Messages

Hi All,

still sorting columns (e.g. by ascending or descending %) not completelly working, some smaller numbers in the middle of bigger.

I supposse that being beta is that "Update" (the program itself option) is not working.

in previous version I saw that when a computer run out of work the last workunit done remains in its computer screen as "Ready to report", if program restarted the task windows is empty windows (as it should).

in projects window computer with shares of 100 and 25% show different length of coloured bar, should be the same??

any windows for logging finished results??

The Update is switched off, too much work, too many changes too fast.
Can you send me a screen shot off the project window. So I can take look.
I took note of the not removed work from the window, difficult to test..... And maybe I fixed it already.
A lot of that is guesswork and not well documented.

V 0.009

Removed a small, but nasty memory leak in the original BOINC part, a possible cause for crashes even though I never saw one.
Updated the manual a bit.
Made the sorting in the Task window stick.
Forgot the other menu's in the taskbar.

V 0.008 is now ready for download.
Move the program into the taskbar.
The computer window now hides itself.
Any selected computers are connected automatically.
The Elapsed column now displays the real and cuda time.

TThrottle version 1.66.2 Beta (x64 in Athlon x2).

mini window reading:
43.2 - 43.3 - G:52.0

now I open HWMonitor and shows me these readings
Core0: 43 (correct)
Core1: 38 (could be correct)
GPU: 52 (agreed)

Inmediatelly I open HWMonitor the readings in mini windows exchange to:
38,2 - 38,2 - GPU:52

I close HWMonitor and the mini windows remains in the lower value of CPU

Strange that HWMonitor should interfere with TThrottle.
But it may be that a cpu setting was modified by HWMonitor.

V 0.07 Now with upload. And stores the column width settings.

V 0.06
Solved the problem with the login of localhost.
In the project page  you can stop start etc the projects by using the right mouse button.

V 0.05 One step further but some steps to go.
Changed the installation. It is now a one file installation. Lets see how that goes.

For the moment I am disabling the Internet reading part as requested by Seti, as it appears it is illegal to do so.
And I don't want to add to the already high stress on the Seti servers.

This means I will concentrate on the remote / local viewing part of the program and see if there are other way to reach the same goal.  

V 0.03 in 32 and in 64.

The second version 0.0.2. Some mayor obstacles are behind and it almost looks like something usable.
Added a switch between Tasks and Messages, looks simpler than it actually is....

Hi Fred,

in x64 version in a AMD x2 I'm getting temperatures reading of about 12 degress less than shown in the HWMonitor (x64).

in the laptop version x32 (Turion one Core) I'm getting readings of 27 deg Celsius while with HWMonitor (x32) is 69 deg Celsius. and I getting two readings instead one, because this processor is only one core. (and no thermal sensor for GPU)

no AMD offset are set in the TThrottle.xml.

and this is what is showing the log:

Vendor ID: AuthenticAMD
Vendor: AMD
HighestIntegerValue: 00000001 - Firma Procesador: 00060FB2
Información Misc.: 00000800
Feature Flags1 00000001
Feature Flags2 078BFBFF

Procesador: AMD Athlon(tm) X2 Dual Core Processor BE-2400
Procesador: Familia: Fh, Modelo: 6B, Stepping: 2
Procesador: Revisión: BH-G2, Revisión: G
Procesador: Zócalo: AM2, Tipo: Athlon(tm) 64 X2 Dual-Core
Procesador: Max Die (Tjunction) Temperatura: 70.0 °C
      La Max Die (Tjunction) temperatura real no es este valor
      Este valor es para el cálculo de la temperatura SOLAMENTE
      Max Die (Tjunction) es normalmente sobre Max Case + 5C
Procesador: Temperatura Max Case: 70.0 °C, Potencia Max: 0.0 W

Temperatura Core: ajustada Tjunction a: 90 °C
Procesador: Temperatura Max Case: 70.0 °C, Potencia Max: 0.0 W

wow I got one core for free.

cheers, Carmelo

Beta's are less tested... I left it in a testing mode. Gives a nice warning... so this one should be more tested. Version 1.66.2.

Hi Fred,

I've donwloaded and installed BOINC-TG, and read the setup instructions, some FAQ before starting:

- SETI User ID: which one the short one, the CPID, I insert it the short one and could not get any info, I mean I insert the ID and Computer -- Add from Internet, but don't get any computer.
- I could attach manually hosts, I've this computer in the remote_hosts.cfg of every host.
- I've setup the host with the gui_rpc_auth.cfg password of every computer, and the work is seen, but if I Load from internet I got an empty windows with its colummns but no data.

I know that it's a beta program, and much to be polished has to be done, but Why I didin't get any info when attaching with the Seti ID, or really what is the ID that I have to insert.

there has to be done anything with the Windows Firewall??

cheers, Carmelo.

This id:  http://setiathome.berkeley.edu/hosts_user.php?userid
You get this page by pressing "your computers"
But at the moment, I think for a week or so Seti shut down the database access, to conserve bandwidth.
So this feature relies on this database and ..... is not working at the moment.

Ok the first version.
I went a bit off course and added the remote computer option as well. That was a bit more work .

Item no two I would also find usefull, it would be unnecessary to stop BOINC and TThrottle before starting a game.

Christoph

It is possible to auto suspend BOINC when you start a game, that would solve your problems.

I notice you're supporting a lot of newer CPUs, but unfortunately the client I'm looking to manage is a Pentium 4. Is there any chance that P4s or other CPUs will be supported?

I wish I had a better answer... Bu no there is nothing I can do for you. There will be no support the for the older CPU's