Add: Startup log: TThrottle Startup.log.
Add: Dump file cleanup after 14 days.
Add: Limit the number of crashes to 20 / 12 hours.
Changed: Resizable dialogs.
Changed: Installer V 1.40, driver CoInstaller V 1.9
Changed: Driver V 2.5, log processors/group.
Changed: New xml parser.
Changed: All xml files are now in Unicode.
Changed: Uses language files (ttlang), instead of language dll's.
Fixed: Crashed when there were no tasks.
7.002
Fixed: Failed to install the driver on versions below Windows 7.
Congrats on the new beta.
I'm particularly surprised that you have added 'Resizable dialogs so promptly and can report that it is working perfectly.
The new driver installs seemlessly and will be no longer be confusing for new users than the old method was at installation procedure.
I am installing it on my machines now and will check how this new version performs in the morning.
UPDATE:
I was away most of yesterday and came home to note that machines running Vista have encountered a problem with v7. They were updated from v6.50 and installed as Administrator.
14 June 2013 - 11:05:51 Driver not loaded (yet?), retry in 10 seconds
14 June 2013 - 11:06:01 Driver not loaded (yet?), retry in 10 seconds. (2)
14 June 2013 - 11:06:11 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
14 June 2013 - 11:06:11 (L01) ERROR: Driver NOT installed properly14 June 2013 - 11:06:11 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
I have since uninstalled TThrottle and tried a clean install with the same result. Uninstalling and going back to 6.50 works flawlessly.
Fred, please let me know if there are any particular logs you require for further diagnosis
I hving then same problem with 7.00. It installs, but not the driver. Had to go back to 6.31. Must uninstall 7.00 via add/remove programs. Following are the logs from both 7.00 and 6.31 respectively. By the way 7.00 works on windows 8.
7.00
19 June 2013 - 21:55:22 Driver not loaded (yet?), retry in 10 seconds
19 June 2013 - 21:55:32 Driver not loaded (yet?), retry in 10 seconds. (2)
19 June 2013 - 21:55:42 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
19 June 2013 - 21:55:42 (L01) ERROR: Driver NOT installed properly19 June 2013 - 21:55:42 Program version: 7.00,32Bit
Microsoft Windows Vista Business Edition Service Pack 2 (build 6002), 32-bit
Language: User: 1033 (ENU), System: 1033 (ENU), Selected: 0 () Used: 1033 (ENU)
NVidia
AMD_ATI
Try to load Library: atiadlxx.dll
Try to load Library: atiadlxy.dll
Library not found
Quote from: idahofisherman on June 20, 2013, 04:40:52 AM
I hving then same problem with 7.00. It installs, but not the driver. Had to go back to 6.31. Must uninstall 7.00 via add/remove programs. Following are the logs from both 7.00 and 6.31 respectively. By the way 7.00 works on windows 8.
7.00
19 June 2013 - 21:55:22 Driver not loaded (yet?), retry in 10 seconds
19 June 2013 - 21:55:32 Driver not loaded (yet?), retry in 10 seconds. (2)
19 June 2013 - 21:55:42 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
19 June 2013 - 21:55:42 (L01) ERROR: Driver NOT installed properly19 June 2013 - 21:55:42 Program version: 7.00,32Bit
Microsoft Windows Vista Business Edition Service Pack 2 (build 6002), 32-bit
Language: User: 1033 (ENU), System: 1033 (ENU), Selected: 0 () Used: 1033 (ENU)
NVidia
AMD_ATI
Try to load Library: atiadlxx.dll
Try to load Library: atiadlxy.dll
Library not found
Try again, this version 7.001 has a modified installer, it waits a bit longer before installing the new one.
v7.001 is on beta page (http://www.efmer.eu/boinc/download_beta.html)
FEEDBACK:
Installing new beta over 6.50 doesn't appear to have fixed the problem
20 June 2013 - 13:05:55 Driver not loaded (yet?), retry in 10 seconds
20 June 2013 - 13:06:05 Driver not loaded (yet?), retry in 10 seconds. (2)
20 June 2013 - 13:06:15 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
20 June 2013 - 13:06:15 (L01) ERROR: Driver NOT installed properly20 June 2013 - 13:06:15 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
Language: User: 2057 (ENG), System: 2057 (ENG), Selected: 0 () Used: 1033 (ENU)
Quote from: coolstream on June 20, 2013, 12:11:34 PM
v7.001 is on beta page (http://www.efmer.eu/boinc/download_beta.html)
FEEDBACK:
Installing new beta over 6.50 doesn't appear to have fixed the problem
20 June 2013 - 13:05:55 Driver not loaded (yet?), retry in 10 seconds
20 June 2013 - 13:06:05 Driver not loaded (yet?), retry in 10 seconds. (2)
20 June 2013 - 13:06:15 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
20 June 2013 - 13:06:15 (L01) ERROR: Driver NOT installed properly20 June 2013 - 13:06:15 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
Language: User: 2057 (ENG), System: 2057 (ENG), Selected: 0 () Used: 1033 (ENU)
First restart your computer.
Make sure TThrottle isn't running.
Go to C:\Program Files\eFMer\TThrottle
Click on InstallDriver an with the right mouse key select "run as administrator"
Select "Remove driver" exit.
Run InstallDriver again as above and select Install Driver.
That was a fast reply!
I'll try your instructions and report back
FEEDBACKNo luck following your instructions
InstallDriver64 log
QuoteMicrosoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
-------------------------------------------------------------------------
Installer 64 Bit V1.40
StartService failure! Error = 127 (start driver)
Unable to install driver. (is the .inf file present?)
ControlService failed! Error = 1062
ERROR: Driver not installed properly. (LoadDriver Dlg)
Without making any further changes, I then attempted an install as Administrator, but still no luck
TThrottle log
Quote20 June 2013 - 14:42:49 Driver not loaded (yet?), retry in 10 seconds
20 June 2013 - 14:42:59 Driver not loaded (yet?), retry in 10 seconds. (2)
20 June 2013 - 14:43:09 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
20 June 2013 - 14:43:09 (L01) ERROR: Driver NOT installed properly20 June 2013 - 14:43:11 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
Language: User: 2057 (ENG), System: 2057 (ENG), Selected: 0 () Used: 1033 (ENU)
@idahofisherman, I note that your report concludes with a GPU error. The end of mine (which I hadn't included in the report above) shows a success. Here's an example:
QuoteAmd/Ati: found 1 devices
Amd/Ati: AMD Radeon HD 7900 Series Present (Pos: 0, Valid adapter: 0)
20 June 2013 - 14:43:11 AdapterInfo: Pos: 0, Valid adapter: 0, Index: 0, AMD Radeon HD 7900 Series
Pos: 0, Temperature: 39
Quote from: coolstream on June 20, 2013, 12:47:59 PM
That was a fast reply!
I'll try your instructions and report back
FEEDBACK
No luck following your instructions
InstallDriver64 log
QuoteMicrosoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
-------------------------------------------------------------------------
Installer 64 Bit V1.40
StartService failure! Error = 127 (start driver)
Unable to install driver. (is the .inf file present?)
ControlService failed! Error = 1062
ERROR: Driver not installed properly. (LoadDriver Dlg)
Did you restart your system?
Quote from: fred on June 20, 2013, 01:56:18 PM
Did you restart your system?
Yes. I'll have more time later and will try again on another machine and let you know if there's any difference.
I'm clutching at straws, but your instructions mention the x86 installer. I wonder if you have tried the 64-bit version or even if that would make any difference to the outcome?
Quote from: coolstream on June 20, 2013, 03:55:21 PM
Quote from: fred on June 20, 2013, 01:56:18 PM
Did you restart your system?
Yes. I'll have more time later and will try again on another machine and let you know if there's any difference.
I'm clutching at straws, but your instructions mention the x86 installer. I wonder if you have tried the 64-bit version or even if that would make any difference to the outcome?
Most of the testing is done with Win 7 64 and a final check with Win 7 32.
Check the Windows update if there is an update pending.
Something like User-Mode Driver Framework-versie 1.9 Or Windows Driver Framework.
FYI, I've tried another Vista machine and get the same problem.
OK, Windows Update has nothing for me apart from Skype which I don't want to update.
I have flicked through the update history and can't seem to find UMDF. However, this link (http://www.microsoft.com/en-gb/download/details.aspx?id=38421) is showing the latest version as 1.11 and refers to KB Articles:KB2685813.
User-Mode Driver Framework version 1.11 update for Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2 (http://support.microsoft.com/kb/2685813) is confusing me though. The title suggests it is available for Vista and gives info on how to check it has been installed. The download link, however, goes to a page (http://www.microsoft.com/en-us/download/details.aspx?id=38421) for Win 7 and Win Server 2008 R2.
Is UMDF required for earlier versions of TThrottle? If not, this might explain why v6 works and v7 doesn't. :-\
I tried 7.001 and it failed also. No data in temperature tab or on the desk top.'
You need to change program numbers in procedures so that we know we have loaded the correct program.
LOg below:
20 June 2013 - 14:02:15 Driver not loaded (yet?), retry in 10 seconds
20 June 2013 - 14:02:25 Driver not loaded (yet?), retry in 10 seconds. (2)
20 June 2013 - 14:02:35 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
20 June 2013 - 14:02:35 (L01) ERROR: Driver NOT installed properly20 June 2013 - 14:02:35 Program version: 7.00,32Bit
Microsoft Windows Vista Business Edition Service Pack 2 (build 6002), 32-bit
Language: User: 1033 (ENU), System: 1033 (ENU), Selected: 0 () Used: 1033 (ENU)
NVidia
AMD_ATI
Try to load Library: atiadlxx.dll
Try to load Library: atiadlxy.dll
Library not found
Vendor ID: GenuineIntel
Vendor ID: INTEL
HighestIntegerValue: 0000000A - Processor Signature: 000006F6
Misc. info: 00020800
Feature Flags1 0000E39D
Feature Flags2 BFEBFBFF
Processor: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz
Processor: Family: 6h, Model: F, Stepping: 6
Processor: Type: T5500, Stepping: B2, Cores: 2
Processor: Max Case Temperature: 100.0 °C, Max Power 34.0W
Processor: Speed: 1.66 GHz, Busspeed: 667 MHz
Processor: tSpec: SL9SH, Technology: 65 nm, Cache: 2 MB
Processor: VoltageLow: 1.0 V, VoltageHigh: 1.3 V
Core Temperature: adjusted Tjunction to: 80 °C
TJunction using: 80 °C
Regulator threads used for the CPU: 1
BOINC:
59.78.96.61_8082_dhome
boinc.bakerlab.org_rosettasymbols
boinc.berkeley.edu_vbox
boinc.freerainbowtables.com_distrrtgen
boinc.isa.ru_dcsdg
boinc.vanderbilt.edu_bcl
boinc.vgtu.lt_vtuathome
climateprediction.net
ec2-23-23-126-96.compute-1.amazonaws.com_pogs
einstein.phys.uwm.edu
escatter11.fullerton.edu_nfssymbols
lhcathome2.cern.ch_test4theory
mindmodeling.org_palm_project
ns203435.ovh.net_cb_test
setiathome.berkeley.edu
shasta.chem.uh.edu_SolarAtHome
surveill.dei.uc.pt_surveill
volunteer.cs.und.edu_wildlife
work.charityengine.com
wuprop.boinc-af.org
www.freehal.net_freehal_at_home
www.fti.dn.ua_magnetism
www.malariacontrol.net
www.renderfarm.fi
www.worldcommunitygrid.org
You can help by reading www.efmer.eu/boinc/faq.html How can I help!
Select the send EMail button,or copy everything in this logging window and mail it to me!
boinc[At]efmer[Dot]eu. We use this information to improve this product.
Gpu's found: 0, bus slots used by BOINC: -1 -1 -1 -1 -1 -1 -1 -1
20 June 2013 - 14:02:43 Number of matching Programs (Processes): 3
CPU: hsgamma_fgrp2_1.04_windows_intelx86.exe, PID: 59664, Threads: 3
CPU: astropulse_6.01_windows_intelx86.exe, PID: 62512, Threads: 3
CPU: data_collect_v3_3.50_windows_intelx86__nci.exe, PID: 61788, Threads: 3
--------------------------------------------------------------------------------------------------------------------- 3 0 0 0
20 June 2013 - 14:02:43 Connected with BOINC client
20 June 2013 - 14:02:43 Number of matching Programs (Processes): 3
Quote from: fred on June 20, 2013, 05:45:13 PMMost of the testing is done with Win 7 64 and a final check with Win 7 32.
Fred, if you're interested, I could make one of my Vista machines available to you using Team Viewer (http://www.teamviewer.com/en/index.aspx?pid=uvnc_jpg_1)
Quote from: coolstream on June 21, 2013, 12:22:35 AM
Quote from: fred on June 20, 2013, 05:45:13 PMMost of the testing is done with Win 7 64 and a final check with Win 7 32.
Fred, if you're interested, I could make one of my Vista machines available to you using Team Viewer (http://www.teamviewer.com/en/index.aspx?pid=uvnc_jpg_1)
I think I know what's causing it.
A function uses something Win 7 only. That is probable what's causing the problem.
So a XP / Vista driver is what's needed. :o
I think you are right, Fred. I think it most likely that (the lack of) UDMF is the elephant in the room.
The offer of a remote Vista machine still stands if you wish to do any pre-beta testing.
I tested the new 7.002 on an XP 32 machine and it installed properly.
This version now has a separate XP and W7 driver, 4 drivers actually :o
7.002 now works on my vista machine. Thanks.
Good job on the second update.
I have been busy over weekend and have only just tried the new version. For some strange reason, I still can't get it to work on a Vista machine. I'll try again when I have more free time.
I have noticed a few minor points whilst testing the install:
typo. Installer says
QuoteThis will install TThrottle (32/64 Bit): Temperature Throttle by eFMer V 7.0.0.1 on your computer
should be V 7.0.0.2
also shows as 7.0.0.1 | in Control Panel | Programs |
In Remove Driver dialog, msg reads
QuoteDriver removed! (If you see any errors the driver way already removed or not running)
'way' should be 'was'
'Install Driver' dialog still reports that driver cannot be installed because INF file is missing
QuoteMicrosoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
-------------------------------------------------------------------------
Installer 64 Bit V1.40
StartService failure! Error = 127 (start driver)
Unable to install driver. (is the .inf file present?)
ControlService failed! Error = 1062
ERROR: Driver not installed properly. (LoadDriver Dlg)
Quote from: coolstream on June 24, 2013, 02:16:01 PM
Good job on the second update.
I have been busy over weekend and have only just tried the new version. For some strange reason, I still can't get it to work on a Vista machine. I'll try again when I have more free time.
I corrected the installer version.
Download it again to be absolutely sure you got version 2.
While installing check for the message XP driver.
QuoteI corrected the installer version.
Download it again to be absolutely sure you got version 2.
v7.0.0.1 for comparison with the 7.0.0.2 versions:
CRC32: CF511F19
MD5: E03D9B466B355D516F5E0C2F9470D393
SHA-1: 6519166C22BCBA42B6B1B640BE64471F28878951
v7.0.0.2 downloaded previously:
CRC32: 86FE7714
MD5: DF2DEA9F77748910297B617DA4647CD6
SHA-1: A58D2F732CCDD47E5B5F5E1882C3CB119231284D
v7.0.0.2 downloaded from Europe server:
CRC32: DDAFE44F
MD5: 843EE7DE0B7D2223D5A9A337CBB3000A
SHA-1: 6285B590FF09F3AC0C1C94F85361F13576517259
v7.0.0.2 downloaded from America server:
CRC32: DDAFE44F
MD5: 843EE7DE0B7D2223D5A9A337CBB3000A
SHA-1: 6285B590FF09F3AC0C1C94F85361F13576517259
file hashes created with hashtab (http://www.implbits.com/HashTab.aspx)The 7.0.0.2 version I had downloaded previously appears to be different to the ones I now have, but comparing it with 7.0.0.1, it would appear that you have indeed uploaded a new version with the same name!
REQUEST: It might be a useful addition to include a file hash on the download page ;)
Now for the bad news, I have tried installing 7.0.0.2 over 7.0.0.1 (and over 6.5.0) and also have done a complete uninstall before reinstalling 7.0.02. No matter whatever method I have used, I still can't get 7.0.0.2 to perform. The log always says that driver is not properly installed.
(1)I have also tried your earlier suggestion of using InstallDriver64.exe to uninstall and reinstall driver but the reinstall process always reports that a required INF file is missing.
Mixed good and bad news:Over the past few days, I have been building two new systems (one Vistax64 sp2 and one Win7x64 sp1). Both systems are fully up to date with all Microsoft recommended updates and are running Norton Internet Security 2013 (fully updated). I have also deployed an XP machine (with all updates made). The Win7
and XP machines both work with 7.0.0.2, however this new Vista machine does not.
It's strange that idahofisherman reports that 7.0.0.2 works on Vista whilst neither of my Vista systems can get it to report core temps whilst they are happy running v6.5.
(1) Vista machine running TThrottle 7.0.0.2:Quote27 June 2013 - 16:03:11 Driver not loaded (yet?), retry in 10 seconds
27 June 2013 - 16:03:21 Driver not loaded (yet?), retry in 10 seconds. (2)
27 June 2013 - 16:03:31 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
27 June 2013 - 16:03:31 (L01) ERROR: Driver NOT installed properly27 June 2013 - 16:03:31 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
Language: User: 2057 (ENG), System: 2057 (ENG), Selected: 0 () Used: 1033 (ENU)
Amd/Ati: found 1 devices
Amd/Ati: AMD Radeon HD 7900 Series Present (Pos: 0, Valid adapter: 0)
27 June 2013 - 16:03:31 AdapterInfo: Pos: 0, Valid adapter: 0, Index: 0, AMD Radeon HD 7900 Series
Pos: 0, Temperature: 40
Vendor ID: GenuineIntel
Vendor ID: INTEL
HighestIntegerValue: 0000000B - Processor Signature: 000206C2
Misc. info: 02200800
Feature Flags1 029AE3BF
Feature Flags2 BFEBFBFF
Processor: Intel(R) Core(TM) i7 CPU 970 @ 3.20GHz
Processor: Family: 6h, Model: 2C, Stepping: 2
TJunction using: 100 °C
BOINC:
www.worldcommunitygrid.org
You can help by reading www.efmer.eu/boinc/faq.html How can I help!
Select the send EMail button,or copy everything in this logging window and mail it to me!
boinc[At]efmer[Dot]eu. We use this information to improve this product.
27 June 2013 - 16:03:42 Number of matching Programs (Processes): 12
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 20576, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 5740, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 25560, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 24508, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 13036, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 23212, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 11868, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 21812, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 9984, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 24656, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 24244, Threads: 3
CPU: wcgrid_faah_7.15_windows_x86_64, PID: 8404, Threads: 3
--------------------------------------------------------------------------------------------------------------------- 12 0 0 0
27 June 2013 - 16:03:42 Connected with BOINC client
27 June 2013 - 16:03:42 Number of matching Programs (Processes): 12
Vista machine running TThrottle 7.0.0.2:
Quote from: coolstream on June 27, 2013, 05:08:02 PM
Vista machine running TThrottle 7.0.0.2:
XP 32 bit working. XP 64?
Vista 32 bit working. 64 bit inconclusive.
Win 7 32/64 working.
I will setup a test machine with Vista 64 bit, to see if this a reproducible problem.
Quote from: coolstream on June 27, 2013, 05:08:02 PM
REQUEST: It might be a useful addition to include a file hash on the download page ;)
As I made a too quick test build.... The exe itself is protected by a certificate, so if the version in the setup read correct, you have the right file.
I see your reply to my unedited version. I was in the midst of correcting typos, so I hope it is clearer now.
QuoteI will setup a test machine with Vista 64 bit, to see if this a reproducible problem
I look forward to your findings. To save time, the offer of remotely running one of my Vista boxes still stands.
You can help by looking here: C:\Windows\inf
Search for cputemperature in:
setupapi.app.log
and
setupapi.dev.xxxxxxxxxxxxxx.log the xxxxx are a number.
Quote from: fred on June 27, 2013, 05:36:09 PM
You can help by looking here: C:\Windows\inf
Search for cputemperature in:
setupapi.app.log
and
setupapi.dev.xxxxxxxxxxxxxx.log the xxxxx are a number.
setupapi.app.log:
Cannot find "cputemperature"there is no setupapi.dev.xxxxxxxxxxxxxx.log file, but there are 3 setupapi
.ev files
setupapi.ev1, setupapi.ev2 and setupapi.ev3 apart from having incomplete names all appear to be corrupted when compared to the same file on a working Win7 system.
Would you like to see them anyway?
I have uploaded the three files to my skydrive (https://skydrive.live.com/#cid=4EA3E7D505ECE613&id=4EA3E7D505ECE613%21185) but the fact that there are 3 'corrupted' files seems sinister to me.
To clarify:
My previous post related to a Vista system with v7.0.0.2 installed but not working.
On the other Vista system with attempted install and then subsequently 6.5 installed, the 3 .ev(x) files exist but there are also the two files you asked about (but from the subsequent install of 6.5)
Go here: C:\Program Files\eFMer\TThrottle
And delete *.inf and *.sys.
And here: C:\Windows\System32\drivers
Delete: cputemperature.sys
Install everything again.
OK. TThrottle stopped and the inf and sys files removed as per your instructions. TThrottle 7.0.0.2 reinstalled as Administrator. Temps still not being captured with the following log:
Quote29 June 2013 - 07:09:40 Driver not loaded (yet?), retry in 10 seconds
29 June 2013 - 07:09:50 Driver not loaded (yet?), retry in 10 seconds. (2)
29 June 2013 - 07:10:00 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
Have you been able to replicate this?
Quote from: coolstream on June 29, 2013, 06:16:46 AM
OK. TThrottle stopped and the inf and sys files removed as per your instructions. TThrottle 7.0.0.2 reinstalled as Administrator. Temps still not being captured with the following log:
Quote29 June 2013 - 07:09:40 Driver not loaded (yet?), retry in 10 seconds
29 June 2013 - 07:09:50 Driver not loaded (yet?), retry in 10 seconds. (2)
29 June 2013 - 07:10:00 OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed! Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
Have you been able to replicate this?
Yep. My guess it's a bug in Vista 64.
But the problem is resolved by using the older 2.4 driver.
2.5 only has one item for W7 and up, for better core detection.
This is probably the best test version on this side. :o
This probably means that 2.4 is the last < W7 driver.
QuoteYep. My guess it's a bug in Vista 64.
I have been doing the latest tests on this one Vista64 machine, so I will do some tests on another Vista x86 rig.
If that gives the same result, then we'll have to wonder how Idahofisherman was able to report that v7 on Vista worked for him
QuoteBut the problem is resolved by using the older 2.4 driver.
2.5 only has one item for W7 and up, for better core detection.
One thing I have discovered by chance is that it is not as easy as it was with earlier versions to downgrade from v7 to v6.
This machine is presently running v6.50 but is being shown as being v7 with the 'wrong/no drivers' report.
When uninstalling v7 and then installing v6.50, the install reports that the
lang files are missing (but <v 7 didn't need them). If I copy the lang folder from a v7 machine to the Vista machine, TThrottle reports that the wrong version of drivers are installed and suggests to use InstalDriver to fix the problem. The problem is that if I try this, I get the report that the INF files are missing ???
Uninstalling v7 requires more than simply using Control Panel but would normally not be noticed if upgrading from v7.00 to a later version.
QuoteThis is probably the best test version on this side.
This probably means that 2.4 is the last < W7 driver.
That's a pity if this turns out to be true. I just can't work out how XP and Win7 works and yet Vista doesn't.
Off to test the Vistax86 machine...
I got it working on: Vista 32, Win 7 32/64 I will test the uninstaller.
A hint you probably MUST remove the driver *.sys from C:\Program Files\eFMer\TThrottle.
A quick and dirty way to install an older version: Remove everything from C:\Program Files\eFMer\TThrottle except the xml file.
Next install the older version.
I forgot to add you to the tester in the about box, will be there the next time around. 8)
Quote from: fred on June 29, 2013, 02:45:52 PM
I got it working on: Vista 32, Win 7 32/64 I will test the uninstaller.
A hint you probably MUST remove the driver *.sys from C:\Program Files\eFMer\TThrottle.
A quick and dirty way to install an older version: Remove everything from C:\Program Files\eFMer\TThrottle except the xml file.
Next install the older version.
Yes that is what I have to do too. We are definitely thinking along the same lines. I can confirm that v7 runs on XP and was also thinking about unistalling it and going back to 6.5 just to see if is done cleanly without the need to lift the hood and get my hands dirty ;)
Quote from: fred on June 29, 2013, 02:52:48 PM
I forgot to add you to the tester in the about box, will be there the next time around. 8)
COOL ;D
Quote from: coolstream on June 29, 2013, 03:05:24 PM
Yes that is what I have to do too. We are definitely thinking along the same lines. I can confirm that v7 runs on XP and was also thinking about unistalling it and going back to 6.5 just to see if is done cleanly without the need to lift the hood and get my hands dirty ;)
That worked just fine on my own machine. 8)
Confirmed, although I have to qualify it by saying that downgrading v7 requires the use of Control Panel which does the job cleanly.
I have been thinking more about the Vista x64 problem. Would it be possible to install and run it as a 32-bit program? If so, this could be the solution for Vista x64 users being left behind ;)
Quote from: coolstream on June 29, 2013, 03:50:30 PM
Confirmed, although I have to qualify it by saying that downgrading v7 requires the use of Control Panel which does the job cleanly.
I have been thinking more about the Vista x64 problem. Would it be possible to install and run it as a 32-bit program? If so, this could be the solution for Vista x64 users being left behind ;)
No because the problem is the driver and that needs to be 64 bit.
And no one is left behind, The Vista version is otherwise identical. It only has to do with some Win 7 features.
OK. The reason I said 'left behind' is because of your previous reply,
QuoteThis is probably the best test version on this side.
This probably means that 2.4 is the last < W7 driver.
so I naturally assume that Win7 x64 will be stuck with TThrottle 6.50 :-\