Messages

Thanks for the reply. 
I am using GPU-Z to get the temp reading for the 2nd AMD GPU.

Update
I read in other posts that sometime there are issues with motherboards.  The MB (Z87-A) I put these cards in is fairly old (~7 y).  I have another computer that is only about 2 years old (Prime Z270-A).  I plan to try the dual RX 580's in there to see if it makes a difference.  I just need to run out my BOINC GPU work units first.

[Box with AMD GPU;]

I just upgraded GPU cards on my computers.  I had a single GTX 760 card in each of two computers.  Currently I have both GTX 760 cards in one box and two new RX 580 cards in the other box.  In the one box, TT 7.52 sees both GTX 760 cards fine but the other box (TT 7.52 & 7.72) only sees one RX 580 card.  Other programs such as Afterburner and GPU-Z see both AMD cards.  The computers are mostly used for BOINC crunching.
Any ideas?
Thanks.

Box with AMD GPU;
15 May 2020 - 10:14:27 Driver installed properly. Driver Version: 2.5 W7
15 May 2020 - 10:14:27 Driver regulator: active (OK)
15 May 2020 - 10:14:27 Program version: 7.72,64Bit
Microsoft Windows 7 Ultimate Edition Service Pack 1 (build 7601), 64-bit
Language: User: 1033 (ENU), System: 1033 (ENU), Selected: 0 () Used: 1033 (ENU)
NVidia
AMD_ATI
Try to load Library: atiadlxx.dll
Dll loaded
NULL != ADL_Adapter_NumberOfAdapters_Get
Number of adapters: 10
NULL != ADL_Adapter_AdapterInfo_Get
Adapter index: 0, Radeon RX 580 Series, not active
Adapter index: 0, Radeon RX 580 Series, OK
AdapterActive: 0, Index: 0
ReadGpuUsage: 0
ADL_Overdrive5_CurrentActivety_Get != NULL Activity: 33
Adapter index: 1, Radeon RX 580 Series, not active
Adapter index: 2, Radeon RX 580 Series, not active
Adapter index: 3, Radeon RX 580 Series, not active
Adapter index: 4, Radeon RX 580 Series, not active
Adapter index: 5, Radeon RX 580 Series, not active
Adapter index: 6, Radeon RX 580 Series, not active
Adapter index: 7, Radeon RX 580 Series, not active
Adapter index: 8, Radeon RX 580 Series, not active
Adapter index: 9, Radeon RX 580 Series, not active
Amd/Ati: found 1 devices
Amd/Ati: Radeon RX 580 Series Present (Pos: 0, Valid adapter: 0)
15 May 2020 - 10:14:27 AdapterInfo: Pos: 0, Valid adapter: 0, Index: 0, Radeon RX 580 Series
Pos: 0, Temperature: 57

Vendor ID: GenuineIntel
Vendor ID: INTEL
HighestIntegerValue: 0000000D - Processor Signature: 000306C3
Misc. info: 02100800
Feature Flags1 7FDAFBBF
Feature Flags2 BFEBFBFF

Processor: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz                       
Processor: Family: 6h, Model: 3C, Stepping: 3

TJunction using: 100  °C

Core Temperature: 57 °C, Raw Data: 882B0800
88280800,882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,
882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,
882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,
882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,882b0800,
|0;1;2;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;

This Processor has 4 cores and  4 temperature sensors.
Processor group: 0, Processors: 4
Regulator threads used for the CPU: 2

BOINC:
einstein.phys.uwm.edu
milkyway.cs.rpi.edu_milkyway

Gpu's found: 2, bus slots used by BOINC: 0 1993772391 -1 -1 -1 -1 -1 -1
TThrottle is using GPU device position: -1 -1 -1 -1 -1 -1 -1 -1

15 May 2020 - 10:14:38 Number of matching Programs (Processes): 3
CPU: einstein_o2mdf_2.07_windows_x86_64__gw-opencl-ati.exe, PID: 1448, Threads: 4
CPU: einstein_o2mdf_2.07_windows_x86_64__gw-opencl-ati.exe, PID: 1320, Threads: 4
CPU: milkyway_nbody_1.76_windows_x86_64__mt.exe, PID: 5416, Threads: 6
---------------------------------------------------------------------------------------------------------------------   3 0 0 0
15 May 2020 - 10:14:38 Connected with BOINC client
15 May 2020 - 10:14:38 Number of matching Programs (Processes): 3


Box with NVIDIA GPU;
15 May 2020 - 10:21:19 Driver installed properly. Driver Version: 2.5 W7
15 May 2020 - 10:21:19 Driver regulator: active (OK)
15 May 2020 - 10:21:19 Program version: 7.52,64Bit
Microsoft Windows 7 Professional Service Pack 1 (build 7601), 64-bit
Language: User: 1033 (ENU), System: 1033 (ENU), Selected: 0 () Used: 1033 (ENU)
NVidia
LogicalGpu: 0, PhysicalGpuCount: 1
LogicalGpu: 1, PhysicalGpuCount: 1

GeForce GTX 760,Pos: 0, ID: 294064350 | 906695768 | 4487 | busId: 1 | busSlot: 1
GeForce GTX 760,Pos: 1, ID: 294064350 | 906695768 | 4487 | busId: 2 | busSlot: 2
Total PhysicalGpuCount: 2

nvidia: found 2 logical devices
nvidia: found 2 physical devices
NrGpu: 0,  SensorNr: 0, TCount 1 - TMax: 127,  Temp: 57 nvidia: Temperature 57 °C, max Temperature 127 °C
NrGpu: 1,  SensorNr: 0, TCount 1 - TMax: 127,  Temp: 54 nvidia: Temperature 54 °C, max Temperature 127 °C

nvidia: GeForce GTX 760, GeForce GTX 760
AMD_ATI
Try to load Library: atiadlxx.dll
Try to load Library: atiadlxy.dll
Library not found

Vendor ID: GenuineIntel
Vendor ID: INTEL
HighestIntegerValue: 0000000D - Processor Signature: 000306C3
Misc. info: 06100800
Feature Flags1 7FDAFBBF
Feature Flags2 BFEBFBFF

Processor: Intel(R) Core(TM) i5-4670K CPU @ 3.40GHz                       
Processor: Family: 6h, Model: 3C, Stepping: 3

TJunction using: 100  °C

Core Temperature: 53 °C, Raw Data: 882F0800
882c0800,88280800,88280800,882f0800,882e0800,882e0800,882e0800,882e0800,
882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,
882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,
882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,882e0800,
|0;1;2;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;3;

This Processor has 4 cores and  4 temperature sensors.
Processor group: 0, Processors: 4
Regulator threads used for the CPU: 2

BOINC:
einstein.phys.uwm.edu
milkyway.cs.rpi.edu_milkyway
setiathome.berkeley.edu

You can help by reading www.efmer.eu/boinc/faq.html How can I help!
Select the send EMail button,or copy everything in this logging window and mail it to me!
boinc[At]efmer[Dot]eu. We use this information to improve this product.

Gpu's found: 2, bus slots used by BOINC: 1 2 -1 -1 -1 -1 -1 -1
TThrottle is using GPU device position: 0 1 -1 -1 -1 -1 -1 -1

15 May 2020 - 10:21:30 Number of matching Programs (Processes): 4
CPU: hsgamma_fgrpb1g_1.22_windows_x86_64__fgrpopencl-nvidia.exe, PID: 11160, Threads: 12
CPU: hsgamma_fgrpb1g_1.22_windows_x86_64__fgrpopencl-nvidia.exe, PID: 5164, Threads: 12
CPU: milkyway_1.46_windows_x86_64.exe, PID: 10860, Threads: 3
CPU: milkyway_nbody_1.76_windows_x86_64__mt.exe, PID: 9660, Threads: 6
---------------------------------------------------------------------------------------------------------------------   4 0 0 0
15 May 2020 - 10:21:30 Connected with BOINC client
15 May 2020 - 10:21:30 Number of matching Programs (Processes): 3

Did you try: Expert tab: Reconnect every 120 seconds.  Will try to reconnect if the connection is lost.

The reconnect time is set for 120 seconds.  I stopped the VPN connection, and the other computers did reconnect.  I will try some experiments to try and find what may be causing the problem.  It may be 4 or 5 days before I can try anything, I am going on a business trip.
Thanks, Ron

I just started using OpenVPN to create a VPN portal on a W7 computer that BOINC Tasks 1.66 is installed on.  I have 3 other W7 computers on a home LAN network that I use BOINC Tasks to monitor.  All 4 computers have fixed IP addresses.  BOINC Tasks loses connection with the 3 networked computers when I create the VPN portal.  Can anyone suggest a fix for this?

UPDATE - Everything seemed to work fine for about 10 hours after creating the VPN portal, then I lost the network connections to the other 3 computers.  I was not working on any of the computers at the time.

Thanks, Ron

Thanks Fred!

Looked right at it and didn't notice it!   

I set it for Manual at 15 sec.

I am using release 1.58 on Windows 7 64 bit.  How can I change the default update time on the Task tab?  It is currently at 3 seconds.  I would like to change it to either 10 or 15 seconds. 
I have this same release running on a Windows 7 32 bit machine and the Update time is 6 seconds.

It would be nice to see the computed benchmark numbers, maybe on the "Computers" tab

Thanks!

Place C:\Program Files\eFMer\TThrottle\examples\tthrottle.xml in the same folder as the .exe.
Remove the comments around

<GPU_SETUP>
  <ati_number_gpu> 0 </ati_number_gpu>
<GPU_SETUP>

But... I've never tested it on 0  .

It doesn't like 0 .  Would I need to change "ati" to "nvidia" or 'cuda"?

TThrottle.xml found.
ERROR: [mber_gpu><gpu_setup>^<exclude><project>fr]
Not expected or no value: <gpu_setup>

TT is not seeing the ATI on-board GPU on my other box.  This is probably why TT is not displaying a GPU temp on that box.

Is there a way to disable the GPU temp display in the Temperature Window and In the Main Program display?

I am running TThrottle 3.11 on 2 machines, both machines have on-board GPU's.
One machine has an ATI GPU and the GPU temp does not display anywhere on this machine.
The other machine has an nVidia GPU and TT displays a constant 32 degF temperature.

Neither GPU is being used for any purpose other than normal graphic display.

Thanks, Ron K.

I just downloaded and started using BT 0.93.  I am looking for a replacement for BOINCView, and BT may fit the bill.  Great Job!

Just a thought, I think at least 2 columns currently in the "Tasks" tab (Temperature & Debt) might work out better in different tabs.  Put "Temperature" in the "Computer" tab, and "Debt" in the "Projects" tab.

Ron K.