Messages

regarding one of my computers:

Latest TT, CPU & GPU temperature reading via external with OHM
CPU AMD Ryzen 3700X - GPU AMD Radeon RX 6600 XT

one issue with this computer that most of the times after reboot computer TT only shows the CPU temperature with loos of data in the TT external tab in the GPU, if TT killed and restarted it starts showing the correct readings, it has been this for last at least three version of TT

Hi Fred,

as far as I see, now displaying correctly the temperatures.

for the first time it has been painful slow for showing graphics.

one of my computer is not showing %GPU & Max GPU, the AMD one.
it has the CPU & GPU temperature reading via external as OHM.

another issue with this computer that most of the times after reboot computer TT only shows the CPU temperature with loos of data in the TT external tab in the GPU, if TT killed and restarted it starts showing the correct readings, it has been this for last at least three version of TT

with the last computer

AMD Ryzen 5 3350H and Radeon Vega 8 Graphics (embebed), using OHM for CPU temp and GPU-Z for GPU temp.

killed TT.
killed OHM.
killed GPU-Z
started TT after some seconds started displaying BT temp graph, with correct CPU temp=0 and no GPU temp
started OHM and seen correct CPU temperature.
started GPU-Z and seen the correct data, %GPU and Max GPU displayed.

all temp graphs after being working for a while and exchanging from computer to computer these freezes and doesn't move.
restarted BT and again black windows in temperature graph for all computers.

Same for small intel miniPC

Intel processor J4125 and intel UHD graphics 600, using TT for CPU temp and GPU-Z for GPU temp.

killed TT.
killed OHM.
started TT after some seconds started displaying BT temp graph, with correct CPU temp and no GPU temp
started GPU-Z and seen the correct data, %GPU and Max GPU displayed.

Done some trick to see what is happening.

AMD processor with AMD Ryzen 3700X & Radeon RX 6600 XT
BT running.
killed TT.
killed OHM.
started TT after some seconds started displaying BT temp graph, of course with 0 temp and no GPU temp
started OHM and started to see the correct data but %GPU and Max GPU greyed and not displayed.

I'll send PM with screenshot of it, now I'll try the same in another computers and also restarting BT if I'd be able to see the graph again.

I checked it out and it happens when you click on a computer the isn't connected.
After selecting a connected computer and a timeout the display is normal again.

All my computers are connected and none is showing in BT the graph, only a black screen.
already awaited quite long time if for any reason had no enough data and no graph came out.

I've seen from previous version and also this one that in one of my computers (AMD with also AMD GPU, this one not embebed in processor, standalone):
data from Open Hardware Monitor (OHM) both CPU & GPU, AutoStart with system startup.
TT also in startup.
started system and TT only displaying one temperature, supposed to be CPU temp, and no way of showing the GPU temp.
killed & restarted TT and now showing both temperatures correctly.
use to happen from time to time and after systems updates like windows update, etc.

Fixed in TThrottle V 7.77

I've updated to TT 7.77 in all computers, restarted, etc. and only visible black screen in BT neither axis nor temperatures, of course in TT I can see perfectly the graph but nothing in BT.

I could see for a while once in my localhost but TT was not running properly as it didn't show the GPU temp, that it's read from external software (OHM), I restarted TT and again could not see anything, only a black screen where supposed to be the graph.

Already reported in 1.89

still in version 1.90 not shown in temperature graph of any computer:
% Cpu, Max Core, % GPU, Max GPU values
only the Core Temp graph.

thanks, working perfectly   

still in version 1.90 not shown in graph:
% Cpu, Max Core, % GPU, Max GPU values
only the Core Temp graph.

I have this too: tasks tab:
1 CPU + 1 AMD/ATI GPU

AMD/ATI GPU is ok that translates to AMD if you set it to condense.

How to set it to condense?

Extra - BoincTasks settings - Tasks - Condense use column - tick activated but still showing AMD/ATI, also restarted app with same result.

Gone to button either tab "Graph Temperature" and only displayed the CPU temp of any computer with all tick boxes greyed except "cpu".
double checked if could be any miscommunication with TT in TThrotle tab of BT (latest version 7.75) and all parameters received correctly for all computer.

I'll send you PM with screen-shots of my computers.

It was an installer problem, left the older BoincRpc.dll file in place, instead of replacing it with the recent BoincRpc.dll file.
V 7.5 Beta should work correctly.

Tested 7.5 and showing correctly running tasks

thanks

[0,25 CPUs + 1 AMD/ATI GPU]

In Tab "History" column "usage":

Moo! Wrapper   1.05 dnetc (opencl_ati_101)   dnetc_r72_1673220971_13_823_0   0,25 CPUs + 1 AMD/ATI GPU   ...

another computer in same Tab

Amicable Numbers   3.02 amicable_10_21 (opencl_amd)   amicable_10_21_30967_1673144102.652968_579_1   1 CPU + 1 AMD/ATI GPU ...

In Task Tab is shown in two computer literally as:
+ 1 AMD/ATI GPU