News:

Follow BoincTasks on Twitter Facebook        Visit our website here.
BoincTasks cloud login is working again

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Pepo

#16
Translations / Re: Slovak
September 22, 2013, 01:41:36 PM
Quote from: fred on September 22, 2013, 10:11:08 AM
Quote from: Pepo on September 21, 2013, 09:17:41 PM
The Slovak BT 1.53 language file is in the upload area.


  • 4) Where is it possible to see and check <TimeStart> + <TimeUp> strings' usage?
  • 5) My Long Term History suddenly does not open  ??? I forgot what/where to check  :-[

4) Computers Tab, right mouse key, context menu computer properties.
5) Did you check Move to long term history after in the History setting?
4) Yes, the Time Stats block. But these two values are not (yet?) there. Maybe after a few days and start cycles of usage?

5) My Move to LTH Has been on for... always. The problem was, that the window was opening somewhere out of the display area - I've finally catched and revealed it it today with Alt-Space-Move-Cursorkeys-Mousecursor sequence - a hint for this is, when your current window is suddenly not the topmost one, which means that something else opened up somewhere...
But Yesterday I've been trying the same, to no avail... :-\ simply the LTH window was not opening and the main BT window kept topmost  ???
#17
Translations / Re: Slovak translation
September 21, 2013, 10:51:22 PM
The Slovak TT 7.14 language file is in the upload area.

A few enhancements and complaints:

  • I've noticed, that on the Programs tab, the left Temperature section is too narrow and my "Set core" and "Set GPU" strings (the second words) are clipped already for years  ::) It could also help to make the Set GPU's editbox much narrower (the same like the other three ones above) and shift the texts to the lefy by some 1 centimeter, to match their offsets from the editboxes with those of the percentage strings.
  • The <Fahrenheit> would need some place for 2-3 more characters
  • The <ShowAll> string is also clipped a bit - 2 characters more place...
  • Graph tab, the button for the second scalable graph has the "2" attached at "Graph" without a space in between ("Scalable Graph2" instead of "Scalable Graph 2").
  • Expert: on "Days graph buffer. (requires restarting TThrottle)" the dot (period) would suit better at the end (behind the closing parenthesis).
  • In the About window, there is a link http://www.efmer.eu at the bottom left corner. When hovering mouse cursor above it, a hand icon appears, but its hot spot is set incorrectly (I assume it should have been at the finger tip).
#18
Translations / Re: Slovak
September 21, 2013, 09:17:41 PM
The Slovak BT 1.53 language file is in the upload area.


  • I've noticed, that the ENU language file contains many duplicated lines (luckily containing identical text), like <HistoryApplication> ... <HistoryMemory>, <RowVirtual> + <RowMemory>, possibly others as well?
  • Recently all CPU and GPU texts were capitalized, now there are again some Cpu and Gpu (at least in the <Time***> section).
  • If the <Time***> values are in percent (it seems so), could you add a trailing % sign?
  • Where is it possible to see and check <TimeStart> + <TimeUp> strings' usage?
  • My Long Term History suddenly does not open  ??? I forgot what/where to check  :-[
#19
Wish List / Re: Moving WU to different computers
September 21, 2013, 06:56:32 PM
Quote from: fred on July 10, 2013, 02:04:39 PM
The BOINC project server doesn't allow this to happen. No way.
The only viable transfer way I was aware of was to transfer the whole BOINC installation and let it crunch elsewhere. No way to split the WUs.
#20
Beta Testing / Re: Testing V 7.14
September 10, 2013, 04:56:58 AM
This means, would be nice to finish some translations :-[ ???
#21
Wish List / Re: BOINC on Android
August 19, 2013, 11:07:31 AM
Quote from: Corsair on August 18, 2013, 07:51:25 PM
...how could be monitored the temperature of the system via BT?
(I supposed that would be with a 3rd party software in Android?)
but is it possible?
Probably yes. Many tools can display the battery temperature.

This would actually be a very nice, useful and simple addition to BOINC communication protocol, wouldn't it?

Quote from: Corsair on August 18, 2013, 07:51:25 PM
no problem with IP as is fixed assignation via router and properly setup the access.
My home WiFi AP is simulated with a Win7 notebook - network sharing. Unfortunately there is no way to extend the DHCP lease duration and I'm always getting different IP. Additionally, the connection gets unusable after each few (1-30) hours ::)
#22
Wish List / Re: BOINC on Android
August 18, 2013, 04:44:27 PM
Quote from: fred on August 18, 2013, 06:17:31 AM
There is no way to access the data folder.
So no password and IP allowed to change.
??? :-\
#23
Wish List / Re: BOINC on Android
August 17, 2013, 09:12:03 PM
Quote from: fred on August 17, 2013, 08:46:30 AM
Quote from: Pepo on August 16, 2013, 05:43:20 PM
I've no problem monitoring my Android BOINC with BoincTasks.
That's probably a different program, than the official version.
True, it's the NativeBOINC. I've already installed also the official version, but not yet tried to monitor it. What's the problem there?
#24
Wish List / Re: BOINC on Android
August 16, 2013, 05:43:20 PM
I've no problem monitoring my Android BOINC with BoincTasks. As soon as I do not forget finding out and manually enter its daily changing IP address into BT :D
#25
Wish List / Re: Memory usage...
June 24, 2013, 09:28:18 PM
This sounds great!
#26
Wish List / Re: Memory usage...
April 29, 2013, 09:25:01 PM
Quote from: Pepo on April 29, 2013, 09:12:02 PM
At times I'd appreciate a peak memory usage column in the history. IIRC I've wished it as well...
Got it:  Re: Task's memory requirements column
or
Quote from: Pepo on May 27, 2011, 11:00:12 AM
#27
Wish List / Re: Memory usage...
April 29, 2013, 09:12:02 PM
Quote from: fred on April 28, 2013, 01:13:23 PM
Quote from: szopler on April 28, 2013, 10:27:49 AM
Can you add a new column (at tasks tab) which show a memory usage by task in MB?
Why?
Memory usage is virtual, so you never know the actual memory used.
I can concur the request. Occasionally by error (and on a few selected projects regularly and intentionally) there are applications, which consume gigabytes of memory. With "keep preempted apps in memory" and Windows automatically enlarging page file upon memory shortage and BOINC having its memory limit defined in percentage... The commit charge limit is able to skyrocket and one can wonder, why does this machine crawl so slow?

At times I'd appreciate a peak memory usage column in the history. IIRC I've wished it as well...
#28
Wish List / Re: CPU % + GPU %
April 12, 2013, 03:09:50 PM
Quote from: fred on April 11, 2013, 06:17:48 AM
Quote from: Gandalf on April 11, 2013, 03:15:45 AM
The BoincTasks Settings > Tasks provides for CPU %, but does not provide for GPU %. [...] Displaying the GPU % could go a long way to improving the app_config.xml settings.
I will check, but I don't think it's possible.
SysInternals' ProcessExplorer and wj32's ProcessHacker are capable of displaying utilization of all GPU nodes for Win7+ ;)

I do not say it is doable O:-)
#29
Translations / Re: Slovak
March 02, 2013, 08:19:14 PM
The Slovak BT 1.45 language file is in the upload area.

On the BT Settings dlg / Messages  tab: the <MessageHighlight1-10> lines have absolutely werd tab order - please fix/unify ;)
#30
Beta Testing / Re: BT 1.43
November 09, 2012, 09:32:35 PM
Quote from: fred on November 04, 2012, 12:49:34 PM
Quote from: Pepo on November 03, 2012, 10:07:55 PM
Could the text be searched in a case-insensitive way.
1.44.
BT is not noticing the 1.44's existence. I'll try the usual manual download & install.

[edit] It is really not (yet) there. Let's wait for its release ;)