looping at Now checking, the number of processor core temperature messages

Started by benDan, August 18, 2010, 03:05:54 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

benDan

Now checking, the number of processor core temperature messages message is showing.
The bar goes from 0 to a little over 50% then back to zero.

I sent a logging email.

--
Dan benDan

fred

Quote from: benDan on August 18, 2010, 03:05:54 PM
Now checking, the number of processor core temperature messages message is showing.
The bar goes from 0 to a little over 50% then back to zero.

I sent a logging email.
You use the normal 2.00 download?
But it may loop a while so let it run a couple of minutes.

Beyond

Same thing happens on my Brisbane X2.  Processor checking loops for hours and never finishes.  V2.00, Win7-64.

fred

Quote from: Beyond on August 18, 2010, 04:54:43 PM
Same thing happens on my Brisbane X2.  Processor checking loops for hours and never finishes.  V2.00, Win7-64.
Can you give me this part of the log tab.

Core Temperature: 79 °C, Raw Data: 88150000
88130000,88130000,88130000,88130000,88130000,88130000,88150000,88150000,
88140000,88140000,88140000,88140000,88140000,88140000,88140000,88140000,
0123456777777777

Beyond


Core Temperature: 20 °C, Raw Data: 6045E03A
6045e03a,6045e03a,6045e03a,6045e03a,6045e03a,6045e03a,6045e03a,6045e03a,
6045e03a,6045e03a,6045e03a,6045e03a,6045e03a,6045e03a,6045e03a,6045e03a,
0111111111111111

benDan

I waited 1/2 hour and it finished ... I hope that this is a one time only process!
--
Dan benDan

fred

Quote from: benDan on August 18, 2010, 05:31:46 PM
I waited 1/2 hour and it finished ... I hope that this is a one time only process!
Yep one time only. ;D

Beyond

Quote from: fred on August 18, 2010, 05:00:50 PM
Quote from: Beyond on August 18, 2010, 04:54:43 PM
Same thing happens on my Brisbane X2.  Processor checking loops for hours and never finishes.  V2.00, Win7-64.
Can you give me this part of the log tab.

Core Temperature: 79 °C, Raw Data: 88150000
88130000,88130000,88130000,88130000,88130000,88130000,88150000,88150000,
88140000,88140000,88140000,88140000,88140000,88140000,88140000,88140000,
0123456777777777

I tried v2.0 again and the processor check finally completed after about 2 hours.  Unfortunately under v2.0 the ATI HD 4770 GPU read a temp of 0C.  It worked correctly with all previous versions.  I copied in the v2.001 exe and it still read 0C.  Then copied in the v1.91 exe and it now reads correctly (currently 52.7C).

fred

The looping should be solved. in V 2.1
And the ATI GPU, should now read correctly.

Beyond

Quote from: fred on August 19, 2010, 07:55:35 AM
The looping should be solved. in V 2.1
And the ATI GPU, should now read correctly.
v2.1 is installed on my 10 machines and seems to be working properly.  Just waiting for BT v.72 to test the temp reporting on the mixed GPU box.