Non existing cores showing in Temperature and Graphics tabs.

Started by Stephen, January 23, 2012, 03:14:47 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Stephen

I have just found TThrottle (Ver 5.10) and it seems just the thing for me. Thanks very much.  :D
I have an i7 laptop running Win 7 64 bit Home Premium. Going from the Manual I would expect to see no entries for cores 4 through 7. What I do see in the Temperature Tab, is static entries in the right hand column (68.1°C, 68.1°C, 72.6°C & 72.6°C) and blank fields for cores 4 through 7. The Graphic Tab has straight lines for these.
Is this to be expected or a bug?

TIA

Sephen

fred

Quote from: Stephen on January 23, 2012, 03:14:47 PM
I have just found TThrottle (Ver 5.10) and it seems just the thing for me. Thanks very much.  :D
The I7 should show 4 Temperatures. 2 cores share the same sensor, 8 Cores -> 4 Temperatures.
Check the logging, it should show something like this: This Processor has 8 cores and  4 temperature sensors.

The straight lines in the tab, are they temperatures? Because there are 2 max lines and 1 or 2 regulator lines.
You could try 5.50 Beta, there are no known problem with that version.

Stephen

Quote from: fred on January 24, 2012, 01:01:58 AM
Quote from: Stephen on January 23, 2012, 03:14:47 PM
I have just found TThrottle (Ver 5.10) and it seems just the thing for me. Thanks very much.  :D
The I7 should show 4 Temperatures. 2 cores share the same sensor, 8 Cores -> 4 Temperatures.
Check the logging, it should show something like this: This Processor has 8 cores and  4 temperature sensors.

The text had scrolled off the page so I shut down TThrottle and restarted it. The spurious readings disappeared and now all is as it should be.

Quote


The straight lines in the tab, are they temperatures? Because there are 2 max lines and 1 or 2 regulator lines.
You could try 5.50 Beta, there are no known problem with that version.

Yes, the straight lines were temperatures, not limits. See screen shots.
I will run with the released version and keep my eye on things over the next few reboots.
Thanks for a great programme.





Stephen


fred

Try 5.50, go to the expert tab an press "Recalibrate" that should do it.

Stephen

Quote from: fred on January 24, 2012, 11:30:53 PM
Try 5.50, go to the expert tab an press "Recalibrate" that should do it.

Restarting TThrotle did it but I downloaded 5.50 anyway.  :D

Stephen