Testing V 7.00

[fred]

Add: Startup log: TThrottle Startup.log.
Add: Dump file cleanup after 14 days.
Add: Limit the number of crashes to 20 / 12 hours.
Changed: Resizable dialogs.
Changed: Installer V 1.40, driver CoInstaller V 1.9
Changed: Driver V 2.5, log processors/group.
Changed: New xml parser.
Changed: All xml files are now in Unicode.
Changed: Uses language files (ttlang), instead of language dll's.
Fixed: Crashed when there were no tasks.

7.002

Fixed: Failed to install the driver on versions below Windows 7.

[coolstream]

Congrats on the new beta.

I'm particularly surprised that you have added 'Resizable dialogs so promptly and can report that it is working perfectly.
The new driver installs seemlessly and will be no longer be confusing for new users than the old method was at installation procedure.

I am installing it on my machines now and will check how this new version performs in the morning.

UPDATE:
I was away most of yesterday and came home to note that machines running Vista have encountered a problem with v7. They were updated from v6.50 and installed as Administrator.

14 June 2013 - 11:05:51 Driver not loaded (yet?), retry in 10 seconds
14 June 2013 - 11:06:01 Driver not loaded (yet?), retry in 10 seconds. (2)
14 June 2013 - 11:06:11 OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
14 June 2013 - 11:06:11 (L01) ERROR: Driver NOT installed properly14 June 2013 - 11:06:11 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit

I have since uninstalled TThrottle and tried a clean install with the same result. Uninstalling and going back to 6.50 works flawlessly.

Fred, please let me know if there are any particular logs you require for further diagnosis

[idahofisherman]

I hving then same problem with 7.00.   It installs, but not the driver.  Had to go back to 6.31.  Must uninstall 7.00 via add/remove programs.  Following are the logs from both 7.00 and 6.31 respectively. By the way 7.00 works on windows 8.


7.00

19 June 2013 - 21:55:22 Driver not loaded (yet?), retry in 10 seconds
19 June 2013 - 21:55:32 Driver not loaded (yet?), retry in 10 seconds. (2)
19 June 2013 - 21:55:42 OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
19 June 2013 - 21:55:42 (L01) ERROR: Driver NOT installed properly19 June 2013 - 21:55:42 Program version: 7.00,32Bit
Microsoft Windows Vista Business Edition Service Pack 2 (build 6002), 32-bit
Language: User: 1033 (ENU), System: 1033 (ENU), Selected: 0 () Used: 1033 (ENU)
NVidia
AMD_ATI
Try to load Library: atiadlxx.dll
Try to load Library: atiadlxy.dll
Library not found

[fred]

I hving then same problem with 7.00.   It installs, but not the driver.  Had to go back to 6.31.  Must uninstall 7.00 via add/remove programs.  Following are the logs from both 7.00 and 6.31 respectively. By the way 7.00 works on windows 8.


7.00

19 June 2013 - 21:55:22 Driver not loaded (yet?), retry in 10 seconds
19 June 2013 - 21:55:32 Driver not loaded (yet?), retry in 10 seconds. (2)
19 June 2013 - 21:55:42 OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
19 June 2013 - 21:55:42 (L01) ERROR: Driver NOT installed properly19 June 2013 - 21:55:42 Program version: 7.00,32Bit
Microsoft Windows Vista Business Edition Service Pack 2 (build 6002), 32-bit
Language: User: 1033 (ENU), System: 1033 (ENU), Selected: 0 () Used: 1033 (ENU)
NVidia
AMD_ATI
Try to load Library: atiadlxx.dll
Try to load Library: atiadlxy.dll
Library not found

Try again, this version 7.001 has a modified installer, it waits a bit longer before installing the new one.

[coolstream]

v7.001 is on beta page

FEEDBACK:
Installing new beta over 6.50 doesn't appear to have fixed the problem

20 June 2013 - 13:05:55 Driver not loaded (yet?), retry in 10 seconds
20 June 2013 - 13:06:05 Driver not loaded (yet?), retry in 10 seconds. (2)
20 June 2013 - 13:06:15 OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
20 June 2013 - 13:06:15 (L01) ERROR: Driver NOT installed properly20 June 2013 - 13:06:15 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
Language: User: 2057 (ENG), System: 2057 (ENG), Selected: 0 () Used: 1033 (ENU)

[fred]

v7.001 is on beta page

FEEDBACK:
Installing new beta over 6.50 doesn't appear to have fixed the problem

20 June 2013 - 13:05:55 Driver not loaded (yet?), retry in 10 seconds
20 June 2013 - 13:06:05 Driver not loaded (yet?), retry in 10 seconds. (2)
20 June 2013 - 13:06:15 OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
20 June 2013 - 13:06:15 (L01) ERROR: Driver NOT installed properly20 June 2013 - 13:06:15 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
Language: User: 2057 (ENG), System: 2057 (ENG), Selected: 0 () Used: 1033 (ENU)

First restart your computer.
Make sure TThrottle isn't running.
Go to C:\Program Files\eFMer\TThrottle
Click on InstallDriver an with the right mouse key select "run as administrator"
Select "Remove driver" exit.
Run InstallDriver again as above and select Install Driver.

[coolstream]

That was a fast reply!

I'll try your instructions and report back

FEEDBACK
No luck following your instructions

InstallDriver64 log

Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
-------------------------------------------------------------------------
Installer 64 Bit V1.40
StartService failure! Error = 127 (start driver)
Unable to install driver. (is the .inf file present?)
ControlService failed!  Error = 1062
ERROR: Driver not installed properly. (LoadDriver Dlg)

Without making any further changes, I then attempted an install as Administrator, but still no luck

TThrottle log

20 June 2013 - 14:42:49 Driver not loaded (yet?), retry in 10 seconds
20 June 2013 - 14:42:59 Driver not loaded (yet?), retry in 10 seconds. (2)
20 June 2013 - 14:43:09 OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
20 June 2013 - 14:43:09 (L01) ERROR: Driver NOT installed properly20 June 2013 - 14:43:11 Program version: 7.00,64Bit
Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
Language: User: 2057 (ENG), System: 2057 (ENG), Selected: 0 () Used: 1033 (ENU)

[coolstream]

@idahofisherman, I note that your report concludes with a GPU error. The end of mine (which I hadn't included in the report above) shows a success. Here's an example:

Amd/Ati: found 1 devices
Amd/Ati: AMD Radeon HD 7900 Series Present (Pos: 0, Valid adapter: 0)
20 June 2013 - 14:43:11 AdapterInfo: Pos: 0, Valid adapter: 0, Index: 0, AMD Radeon HD 7900 Series
Pos: 0, Temperature: 39

[fred]

That was a fast reply!

I'll try your instructions and report back

FEEDBACK
No luck following your instructions

InstallDriver64 log

Microsoft Windows Vista Ultimate Edition Service Pack 2 (build 6002), 64-bit
-------------------------------------------------------------------------
Installer 64 Bit V1.40
StartService failure! Error = 127 (start driver)
Unable to install driver. (is the .inf file present?)
ControlService failed!  Error = 1062
ERROR: Driver not installed properly. (LoadDriver Dlg)

Did you restart your system?

[coolstream]

Did you restart your system?

Yes. I'll have more time later and will try again on another machine and let you know if there's any difference.
I'm clutching at straws, but your instructions mention the x86 installer. I wonder if you have tried the 64-bit version or even if that would make any difference to the outcome?

[fred]

Did you restart your system?

Yes. I'll have more time later and will try again on another machine and let you know if there's any difference.
I'm clutching at straws, but your instructions mention the x86 installer. I wonder if you have tried the 64-bit version or even if that would make any difference to the outcome?

Most of the testing is done with Win 7 64 and a final check with Win 7 32.

Check the Windows update if there is an update pending.
Something like User-Mode Driver Framework-versie 1.9 Or Windows Driver Framework.

[coolstream]

FYI, I've tried another Vista machine and get the same problem.

OK, Windows Update has nothing for me apart from Skype which I don't want to update. 

I have flicked through the update history and can't seem to find UMDF. However, this link is showing the latest version as 1.11 and refers to KB Articles:KB2685813.
User-Mode Driver Framework version 1.11 update for Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2 is confusing me though. The title suggests it is available for Vista and gives info on how to check it has been installed. The download link, however, goes to a page for Win 7 and Win Server 2008 R2.

Is UMDF required for earlier versions of TThrottle? If not, this might explain why v6 works and v7 doesn't. 

[idahofisherman]

I tried 7.001 and it failed also.   No data in temperature tab or on the desk top.'


You need to change program numbers in procedures so that we know we have loaded the correct program.

LOg below:

20 June 2013 - 14:02:15 Driver not loaded (yet?), retry in 10 seconds
20 June 2013 - 14:02:25 Driver not loaded (yet?), retry in 10 seconds. (2)
20 June 2013 - 14:02:35 OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
OpenService failed!  Error = 1060 (start driver)
Unable to start driver. (is the driver installed?)
20 June 2013 - 14:02:35 (L01) ERROR: Driver NOT installed properly20 June 2013 - 14:02:35 Program version: 7.00,32Bit
Microsoft Windows Vista Business Edition Service Pack 2 (build 6002), 32-bit
Language: User: 1033 (ENU), System: 1033 (ENU), Selected: 0 () Used: 1033 (ENU)
NVidia
AMD_ATI
Try to load Library: atiadlxx.dll
Try to load Library: atiadlxy.dll
Library not found

Vendor ID: GenuineIntel
Vendor ID: INTEL
HighestIntegerValue: 0000000A - Processor Signature: 000006F6
Misc. info: 00020800
Feature Flags1 0000E39D
Feature Flags2 BFEBFBFF

Processor: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz               
Processor: Family: 6h, Model: F, Stepping: 6
Processor: Type: T5500, Stepping: B2, Cores: 2
Processor: Max Case Temperature: 100.0 °C, Max Power 34.0W
Processor: Speed: 1.66 GHz, Busspeed: 667 MHz
Processor: tSpec: SL9SH, Technology: 65 nm, Cache: 2 MB
Processor: VoltageLow: 1.0 V, VoltageHigh: 1.3 V

Core Temperature: adjusted Tjunction to: 80 °C

TJunction using: 80  °C

Regulator threads used for the CPU: 1

BOINC:
59.78.96.61_8082_dhome
boinc.bakerlab.org_rosettasymbols
boinc.berkeley.edu_vbox
boinc.freerainbowtables.com_distrrtgen
boinc.isa.ru_dcsdg
boinc.vanderbilt.edu_bcl
boinc.vgtu.lt_vtuathome
climateprediction.net
ec2-23-23-126-96.compute-1.amazonaws.com_pogs
einstein.phys.uwm.edu
escatter11.fullerton.edu_nfssymbols
lhcathome2.cern.ch_test4theory
mindmodeling.org_palm_project
ns203435.ovh.net_cb_test
setiathome.berkeley.edu
shasta.chem.uh.edu_SolarAtHome
surveill.dei.uc.pt_surveill
volunteer.cs.und.edu_wildlife
work.charityengine.com
wuprop.boinc-af.org
www.freehal.net_freehal_at_home
www.fti.dn.ua_magnetism
www.malariacontrol.net
www.renderfarm.fi
www.worldcommunitygrid.org

You can help by reading www.efmer.eu/boinc/faq.html How can I help!
Select the send EMail button,or copy everything in this logging window and mail it to me!
boinc[At]efmer[Dot]eu. We use this information to improve this product.

Gpu's found: 0, bus slots used by BOINC: -1 -1 -1 -1 -1 -1 -1 -1


20 June 2013 - 14:02:43 Number of matching Programs (Processes): 3
CPU: hsgamma_fgrp2_1.04_windows_intelx86.exe, PID: 59664, Threads: 3
CPU: astropulse_6.01_windows_intelx86.exe, PID: 62512, Threads: 3
CPU: data_collect_v3_3.50_windows_intelx86__nci.exe, PID: 61788, Threads: 3
---------------------------------------------------------------------------------------------------------------------   3 0 0 0
20 June 2013 - 14:02:43 Connected with BOINC client
20 June 2013 - 14:02:43 Number of matching Programs (Processes): 3

[coolstream]

Most of the testing is done with Win 7 64 and a final check with Win 7 32.

Fred, if you're interested, I could make one of my Vista machines available to you using Team Viewer

[fred]

Most of the testing is done with Win 7 64 and a final check with Win 7 32.

Fred, if you're interested, I could make one of my Vista machines available to you using Team Viewer

I think I know what's causing it.
A function uses something Win 7 only. That is probable what's causing the problem.
So a XP / Vista driver is what's needed.