Rule to stop GPU for two hours

[Dingo001]

I am using BOINCTasks 1.95


I have tried to use the rule with waa clock time to stop the GPU running on a Computer for two hours between 07:00 to 09:00 every day.  It does not do anything ?

I have entered the following:

Rule Name:  Stop GPU
Computer: 1-Bundy3
Application: 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA)

Type = Wall-clock time
Value =  Filled in each day by selection 07:00 to 09:00
Time defaulted to 00d,00:00:00  But i have tried 00d,02:00:00  Both did not work
Event = Snooze GPU

When I click "Check" at the bottom it displays

Wall-clock Time  [00d,07:00:00, 00d,09:00:00][01d,07:00:00, 01d,09:00:00]
[02d,07:00:00, 02d,09:00:00][03d,07:00:00, 03d,09:00:00][04d,07:00:00, 04d,09:00:00]
[05d,07:00:00, 05d,09:00:00][06d,07:00:00, 06d,09:00:00]

Any help appresiated.

[Dingo001]

I added the times 17:00 to 20:00 to the Rule. It seems that I needed to activate the rule by clicking the check mark next to the rule after it is created so I did that.

I looked in BOINCTasks at 17:10 and the task was still running an in the Rule Log it said.

24 June 2025 - 17:08:18 Rule(s) ---- Active: 4
24 June 2025 - 17:08:18 Rule: GPU-Stop-Bundy3 Active ---- 1-Bundy3, PrimeGrid, 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA),  | Wall-clock Time 
24 June 2025 - 17:08:18 Rule: GPU-Stop-Bundy3 Deactive ---- 1-Bundy3, PrimeGrid, 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA),  | Wall-clock Time 
24 June 2025 - 17:08:18 Rule: Stop GPU-Rack01 Active ---- 1-Rack01, PrimeGrid, 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA),  | Wall-clock Time 
24 June 2025 - 17:08:18 Rule: Stop GPU-Rack01 Deactive ---- 1-Rack01, PrimeGrid, 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA),  | Wall-clock Time 
24 June 2025 - 17:08:18 ============================================================================== ----
24 June 2025 - 17:09:55 Rule: GPU-Stop-Bundy3 Active ---- Activated: OK, Project: PrimeGrid, 1-Bundy3, Snooze GPU
24 June 2025 - 17:09:55 Rule: Stop GPU-Rack01 Active ---- Activated: OK, Project: PrimeGrid, 1-Rack01, Snooze GPU



What am I doing wrong ??

[fred]

It's been a long time ago.

put in one trigger (red) at 7 hour.
Use Snooze GPU
Fill in 3:00:00 in the white box below.

Press on the check button.

You should see snooze for 00d:03:00:00

In the Rules log check debugging.

I hope that works.

[Dingo001]

Thanks for the reply but it came back with an invalid date  00d:03:00:00

[fred]

Select Wall-clock time, select a start time from the green area.

Select Snooze GPU

In the blank field below Show nothing
03:00:00

Press check

Wall-clock Time  [02d,08:15:00, 02d,08:30:00]    << The red item from the green field


00d,00:00:00,Snooze for: 00d,03:00:00
Time         Snooze GPU  03:00:00