Recent posts

#21

Questions / Re: Rule to stop GPU for two h...

Last post by fred - June 28, 2025, 02:12:00 PM

I think a much better approach is to use the day of week for situations like this.
This will stop the CPU and GPU tasks.

If you don't want that, you can run multiple BOINC clients.
https://efmer.com/boinctasks/linux-running-multiple-boinc-clients/.
Use one for the CPU and another for the GPU, and use the BOINC day of week to suspend the BOINC client.

#22

Questions / Re: Rule to stop GPU for two h...

Last post by Dingo001 - June 27, 2025, 01:36:19 AM

Still kept processing.  Is the time the CPU time that BoincTasks is running on ?  I might just give up.

I didn't get this anywhere on my rules page.

00d,00:00:00,Snooze for: 00d,03:00:00
Time         Snooze GPU  03:00:00     

#23

Questions / Re: Rule to stop GPU for two h...

Last post by fred - June 26, 2025, 01:31:25 PM

Select Wall-clock time, select a start time from the green area.

Select Snooze GPU

In the blank field below Show nothing
03:00:00

Press check

Wall-clock Time  [02d,08:15:00, 02d,08:30:00]    << The red item from the green field


00d,00:00:00,Snooze for: 00d,03:00:00
Time         Snooze GPU  03:00:00     

#24

Questions / Re: Rule to stop GPU for two h...

Last post by Dingo001 - June 26, 2025, 05:57:48 AM

Thanks for the reply but it came back with an invalid date  00d:03:00:00

#25

Questions / Re: Rule to stop GPU for two h...

Last post by fred - June 25, 2025, 02:30:44 PM

It's been a long time ago.

put in one trigger (red) at 7 hour.
Use Snooze GPU
Fill in 3:00:00 in the white box below.

Press on the check button.

You should see snooze for 00d:03:00:00

In the Rules log check debugging.

I hope that works.

#26

Wish List / Re: Recovery for stalled work ...

Last post by fred - June 25, 2025, 02:11:59 PM

What you could do is make a batch file that restarts the Boinc Client.
Next make a rule Progress / min % and select Event run program and fill in the batch file below to run.
Add a time for the rule to be valid.

#27

Questions / Re: Rule to stop GPU for two h...

Last post by Dingo001 - June 24, 2025, 07:14:21 AM

I added the times 17:00 to 20:00 to the Rule. It seems that I needed to activate the rule by clicking the check mark next to the rule after it is created so I did that.

I looked in BOINCTasks at 17:10 and the task was still running an in the Rule Log it said.

24 June 2025 - 17:08:18 Rule(s) ---- Active: 4
24 June 2025 - 17:08:18 Rule: GPU-Stop-Bundy3 Active ---- 1-Bundy3, PrimeGrid, 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA),  | Wall-clock Time 
24 June 2025 - 17:08:18 Rule: GPU-Stop-Bundy3 Deactive ---- 1-Bundy3, PrimeGrid, 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA),  | Wall-clock Time 
24 June 2025 - 17:08:18 Rule: Stop GPU-Rack01 Active ---- 1-Rack01, PrimeGrid, 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA),  | Wall-clock Time 
24 June 2025 - 17:08:18 Rule: Stop GPU-Rack01 Deactive ---- 1-Rack01, PrimeGrid, 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA),  | Wall-clock Time 
24 June 2025 - 17:08:18 ============================================================================== ----
24 June 2025 - 17:09:55 Rule: GPU-Stop-Bundy3 Active ---- Activated: OK, Project: PrimeGrid, 1-Bundy3, Snooze GPU
24 June 2025 - 17:09:55 Rule: Stop GPU-Rack01 Active ---- Activated: OK, Project: PrimeGrid, 1-Rack01, Snooze GPU



What am I doing wrong ??

#28

Wish List / Recovery for stalled work unit...

Last post by Mysteron347 - June 23, 2025, 03:22:24 PM

I've had several instances of tasks stalling, especially Milkyway lately.

I'd like Boinctasks to monitor the %-complete for each work unit and if it does not change for xx minutes, issue a notice (with a maximum of xx notices per xx time-unit to maintain sanity)

I've found that stopping then restarting the BOINC client via the Boinctasks file menu options kicks the stalled tasks into progressing again. Perhaps another option would be to automatically sto then restart the client if a task does not progress after xx minutes.

#29

Questions / Rule to stop GPU for two hours

Last post by Dingo001 - June 23, 2025, 03:12:50 PM

I am using BOINCTasks 1.95


I have tried to use the rule with waa clock time to stop the GPU running on a Computer for two hours between 07:00 to 09:00 every day.  It does not do anything ?

I have entered the following:

Rule Name:  Stop GPU
Computer: 1-Bundy3
Application: 4.10 Genefer 17 Mega (OCLcudaGFN17MEGA)

Type = Wall-clock time
Value =  Filled in each day by selection 07:00 to 09:00
Time defaulted to 00d,00:00:00  But i have tried 00d,02:00:00  Both did not work
Event = Snooze GPU

When I click "Check" at the bottom it displays

Wall-clock Time  [00d,07:00:00, 00d,09:00:00][01d,07:00:00, 01d,09:00:00]
[02d,07:00:00, 02d,09:00:00][03d,07:00:00, 03d,09:00:00][04d,07:00:00, 04d,09:00:00]
[05d,07:00:00, 05d,09:00:00][06d,07:00:00, 06d,09:00:00]

Any help appresiated.

#30

Questions, problems, or request. / Go to this page for questions,...

Last post by fred - June 22, 2025, 03:08:27 PM

BoincTasks-M for Android and iOS has it's own page here.