Messages

Hello Fred,
after installing the RC, I tried the Mail Program. C++ give an error and exit it. You have an EMail about it.
Kind regards, Christoph

Try sending me the email log. C:\Users\<user>\AppData\Roaming\eFMer\TThrottle\maillog.txt
Did you remove the previous version before installing.

There is no log file. There is even no eFMer Folder in that place. Nor is it on D: In the very first version of the prog I got authentification error. The actual Version is since that the only one which I tried. Sorry. Can it be a problem to have the C++ 2005 & 2008 version parallel installed? Yesterday my system hang up completely a couple of times. I guess my installation is slowly but sure going south. As soon as I found my VISTA installation DVD I will kill it. Should solve couple of problems which I have.

The program never came that far.. it crashed before it was at the point of writing a log file.
It may be the Visual Studio installation.
I wait to see if I get a second report of a crash of the mail program.

Yesterday I installed 1.60 over my old 1.56er Version. All seemed fine.

Now I just had set my boinc to suspend and was wondering, why there is one core running with 99%. I found throttle was it.

I waited several minutes if it would "calm down", but no way, it stayed at 99% of one core.

I exited Throttle, started it again and now all is normal.

So, if this happens again, what do you want me to do / to check / ...   ?

I think, this should be solved in 1.62 there is a rc in the beta testing board (at the end). You can give it a try.

Ok the final version 1.6.2 (1), only missing the French translation.

http://www.efmer.eu/download/boinc/test/setup_tthrottle_1_6_2_1_rc.exe 32 Bit
http://www.efmer.eu/download/boinc/test/setup64_tthrottle_1_6_2_1_rc.exe 64 Bit

by the way, could be usefull a tag after the scroll windows something
like "needs restart the program" or "will take effects in the next run".
or
a button of "restart program" too.   

Ok lets see if I can do something for the next version.
For now I wait for all the translations to come in.
I think all the bugs are resolved and I will probably make this one a final release in a couple of days.

the option of language in the Preferences tab is really good idea,
and much better that every language appears in its own name.
but there is not a "Apply" button for inmediate exchange of the
program language (could be nice instead of restarting the program)

Yes but impossible to do and you don't change that very often I hope.

Hello Fred,
after installing the RC, I tried the Mail Program. C++ give an error and exit it. You have an EMail about it.
Kind regards, Christoph

Try sending me the email log. C:\Users\<user>\AppData\Roaming\eFMer\TThrottle\maillog.txt
Did you remove the previous version before installing.

the only thing I've seen in previous version 1.6.1.3 is when started
from a shortcut that has blank the "start from:" is that the
Tthrottle.xml is not read. and checked in this version too.

I could reproduce that one, should be easy to fix.

This looks like a go to me.

Changing the threads tab to CUDA clarified the function for me.

Yes, probably a better name.. It's sometimes hard to find the right name.
Works on one computer with a hungry graphic card, it pushes up the temperature by 10C. So that's a good indication that it works. 

Ok the rc for 1.6.2. Will send the translators a separate mail.

http://www.efmer.eu/download/boinc/test/setup_tthrottle_1_6_2_rc.exe 32 Bit
http://www.efmer.eu/download/boinc/test/setup64_tthrottle_1_6_2_rc.exe 64 Bit

programs, BOINC, Temperatures, and graphic work.
Rules Listbox error fixed. just an observation ... no reset option in rule add sequence.
emergency throttle works
Preference works ... email test works.
logging history missing shows only the last info
Threads info 0 or blank
Expert seems to work (the parts I use anyway)

I removed your email info (It is your password and username) I looks encrypted but is is not.
I did not add everything in the "rule maker", only the basic stuff. The rest can be done directly. Reset and so is more dangerous....
Threads is blank because you are out of CUDA work, as the rest of us if there is no new work.

Ok this one is without the listbox error. And hopefully without any errors
http://www.efmer.eu/download/boinc/test/TThrottle_test_1_6_1_3.zip
I will make preparations for a new beta release with all the languages updated.

Hi all,

why not a unified installer containing the two versions x86 and x64???

depending of the detected OS that the own installer setup the correct
version of program?

e.g. if x86 OS found install the x86 version, if x64 OS found install the
x64 version.

this thing I've seen in another programs that there is only one installer
with the differents versions and it install the one that fits with your
system (and always the higher possible).

Cheers / Carmelo.

The only problem is that you have to download 2 versions and install one of them.
The update option directs you to the right version...

select rule 1.
It moves up but the last rule in the list disappears.
The selected rule stays down below.

yeah, that was the strange thing that I've seen in this release, I didn't know how
to explain it because because I didn't know what happened, when you say remove,
the one that I've pointed was still in the list and another rule dissapeared.

but looks quite cool and really works very well, so well that I was, as we say in Spanish,
"with the fly around the ear" because of the temperature in Phenom that was running at
100% at 64 dec Celsius, so I decided to dismantle the case and clean everything (Tons &
Tons of Shi... dust  ) my surprise was when switched on again the computer and working
at full load the CPU temperature was 15 deg. Celsius lower, now is working at 48, 49 deg. 

cheerr all, Carmelo.

Ok I know enough to do some testing on that part, something looks wrong. Should not be too hard to find.

The rules changes no longer stick.

Do some more checking on that. Changed the list handling a bit, to add the colors. If you can reproduce it ?? That would be nice .

A last version I hope before translation and a new beta version.
http://www.efmer.eu/download/boinc/test/TThrottle_test_1_6_1_2.zip

New in this version a rule add sequence, to make it easier to add rules.
An extra rule reboot. I use this on an unattended system to reboot when the GPU becomes idle. This happens when BOINC (CUDA) crashes.... and will automatically restart the system.
e.g. :
if GPU temperature < 60 reboot reset 70
if GPU temperature < 62 email

Added some colors to the list Red for active, Blue for: can become active and Black waiting for reset of the rule.
Renamed the tab general throttle to rules