Slovak

[Pepo]

The Slovak BT 1.09 language file is in the upload area.

The Rules editor dialog contains "Event" area - there are 4 intermixed rows (Suspend/Resume task/project + Run program), 3 of them behave as radio buttons (like "where to display the event" below it), the "Run program" between them is independent and "feels like a stranger" there.

I'd recommend modifying "Run program" row into a "[ x ] Run program:" checkbox and moving it just above the file name area (which otherwise has no description, such change would also visually explain its use).

<MsgNoProgram> string gets displayed either as-is, when the file name is (empty), or with trailing dot (when followed with entered, but incorrect file name). I'd recommend replacing the dot with a colon, in both cases.

[fred]

The Rules editor dialog contains "Event" area - there are 4 intermixed rows (Suspend/Resume task/project + Run program), 3 of them behave as radio buttons (like "where to display the event" below it), the "Run program" between them is independent and "feels like a stranger" there.

I'd recommend modifying "Run program" row into a "[ x ] Run program:" checkbox and moving it just above the file name area (which otherwise has no description, such change would also visually explain its use).

<MsgNoProgram> string gets displayed either as-is, when the file name is (empty), or with trailing dot (when followed with entered, but incorrect file name). I'd recommend replacing the dot with a colon, in both cases.

They are all events, this way is easier to implement and to add additional events.

[Pepo]

The Rules editor dialog contains "Event" area - there are 4 intermixed rows (Suspend/Resume task/project + Run program), 3 of them behave as radio buttons (like "where to display the event" below it), the "Run program" between them is independent and "feels like a stranger" there.

They are all events, this way is easier to implement and to add additional events.

Then maybe at least group "Suspend/Resume task/project" rows together? And tag the program file input window?

[Pepo]

With a considerable delay, the Slovak BT 1.20 language file is finally in the upload area.


ENU version of <ClientNotStartedBT> contains trailing "...by BoincTasks and is still running", whereas the SKY (and many other) versions are finished with "...by BoincTasks, so it may still be running". OTOH, both DEU and NLD versions seem (as far as I can understand them) to contain something like "... therefore it remains running" and "... therefore it will not be stopped".
Which nuance was the intended final version? I'd vote for something like "... therefore it will/can not be stopped"

In the TThrottle dialog, BT seems to be sharing some translated texts with TTh without them being translated in BT (in the process list diagnostic box). Or is the text being completely received from TTh "as-it-is-formatted", without any further translation? (Apparently.)

I definitely seem to need a detailed explanation of "Project backoff", "backoff times", "backoff interval" for a good translation Fred, could you please point me to some verbose source for a short study?

In the Tasks graphs dialog, <GroupDialogGraphic>'s <Days> string is not at the same horizontal position as the <Period> checkbox and corresponding editbox, but shifted up by some 1/2 char height - appears as a superscript.

[fred]

1) ENU version of <ClientNotStartedBT> contains trailing "...by BoincTasks and is still running", whereas the SKY (and many other) versions are finished with "...by BoincTasks, so it may still be running". OTOH, both DEU and NLD versions seem (as far as I can understand them) to contain something like "... therefore it remains running" and "... therefore it will not be stopped".
Which nuance was the intended final version? I'd vote for something like "... therefore it will/can not be stopped"

2) In the TThrottle dialog, BT seems to be sharing some translated texts with TTh without them being translated in BT (in the process list diagnostic box). Or is the text being completely received from TTh "as-it-is-formatted", without any further translation? (Apparently.)

3) I definitely seem to need a detailed explanation of "Project backoff", "backoff times", "backoff interval" for a good translation Fred, could you please point me to some verbose source for a short study?

3)In the Tasks graphs dialog, <GroupDialogGraphic>'s <Days> string is not at the same horizontal position as the <Period> checkbox and corresponding editbox, but shifted up by some 1/2 char height - appears as a superscript.

1) I removed the message box, the text is in the logging only. BT check if BOINC is running, so "is still running" is correct.
2) The text appears as is in the TThrottle dialog. So translations should be there. Give me a translation and I will update it.
3) Translations, but not all up to date. http://boinc.berkeley.edu/translate/Translation
No other info except in the source code.....
Down/Upload, a general project backoff, time no new attempts will occur for that project for ... time. And the same backoff / item. Both do basically the same.
But documentation is poor on these subjects.
4) Done.

[Pepo]

V 1.25

<GroupDialogUpdate>
   <UnableToStore>      Could't write file               </>
</GroupDialogUpdate>

Missing char - should read "Couldn't".

[fred]

Missing char - should read "Couldn't".

Corrected

[Pepo]

With a delay, the Slovak BT 1.28 language file is finally in the upload area.

Where can I see the controls for addition of an Exclusive App? Just when connected to a 6.13.x client?

[Pepo]

Where can I see the controls for addition of an Exclusive App? Just when connected to a 6.13.x client?

OK, I can see it on other machine with 6.13.12, works and displays correctly.

[fred]

OK, I can see it on other machine with 6.13.12, works and displays correctly.

CPU and GPU.
You can edit the cc_config.xml remotely as well.

[Pepo]

The Slovak BT 1.31 language file is in the upload area.

BTW, although just 9 lines changed during the ENU 1.28 --> 1.31 transition, I've got to check and modify 62 lines for the equivalent SKY transition. You should check the quality of work of your internal translation files' processing team but a LOT of already translated lines (in the BoincTasks_SKY.btlang file, installed with the 1.31 release) got reverted to some past state - often whole blocks of lines.
...
(Maybe the best match was the BoincTasks_SKY.btlang file, delivered with the 1.28 release. Is it possible, that you've unintentionally skipped my translated Slovak BT 1.28 language file?)


I have validation problems. Although my translations of both <ProjectRank> + <RowProjectRank> are equally "Poradie v projekte" and both <ProjectTeamRank> + <RowTeamRank> are equally "Poradie v tíme", just the Settings dialog displays it correctly - the Projects tab's columns headers are missing the middle " v " - they display just "Poradie projekte" and "Poradie tíme". Any idea why? There are other columns with more than 2 words in their header, which do display correctly.

[fred]

I have validation problems. Although my translations of both <ProjectRank> + <RowProjectRank> are equally "Poradie v projekte" and both <ProjectTeamRank> + <RowTeamRank> are equally "Poradie v tíme", just the Settings dialog displays it correctly - the Projects tab's columns headers are missing the middle " v " - they display just "Poradie projekte" and "Poradie tíme". Any idea why? There are other columns with more than 2 words in their header, which do display correctly.

Got it and I will check these problems.

[fred]

I have validation problems. Although my translations of both <ProjectRank> + <RowProjectRank> are equally "Poradie v projekte" and both <ProjectTeamRank> + <RowTeamRank> are equally "Poradie v tíme", just the Settings dialog displays it correctly - the Projects tab's columns headers are missing the middle " v " - they display just "Poradie projekte" and "Poradie tíme". Any idea why? There are other columns with more than 2 words in their header, which do display correctly.

Found the problem. v and ^ are used for sorting. Any isolated v will be removed.
So try to find another translation that doesn't use v in the header.

[Pepo]

Although my translations of both <ProjectRank> + <RowProjectRank> are equally "Poradie v projekte" and both <ProjectTeamRank> + <RowTeamRank> are equally "Poradie v tíme", just the Settings dialog displays it correctly - the Projects tab's columns headers are missing the middle " v " - they display just "Poradie projekte" and "Poradie tíme". Any idea why?

Found the problem. v and ^ are used for sorting. Any isolated v will be removed.
So try to find another translation that doesn't use v in the header.

  we do not have any other suitable preposition for instrumental locative case in the language

Well, please replace (just) the column headers with "Poradie - projekt" and "Poradie - tím" - hope the dash/hyphen is not being used for e.g. underlining

[fred]

  we do not have any other preposition for instrumental case in the language

Well, please replace (just) the column headers with "Poradie - projekt" and "Poradie - tím" - hope the dash/hyphen is not being used for e.g. underlining

Ok this works out just fine.