Messages

I replaced a few days ago the 64-bit version of HWiINFO for the 32-bit portable version 7.10-4540. No disabling the Shared Memory Support or nagging about it since then. Throttle is showing the CPU-temps + GPU-temps now, BoincTasks JS is fully connected with Throttle and shows also both CPU and GPU temps. Job done 

This is the logging;

Code Select Expand

14 August 2021 - 20:33:38 Driver installed properly. Driver Version: 2.5 W7
14 August 2021 - 20:33:38 Driver regulator: active (OK)
14 August 2021 - 20:33:39 Program version: 7.72,64Bit
Microsoft Windows 8 Professional (build 9200), 64-bit
Language: User: 1043 (NLD), System: 1043 (NLD), Selected: 1033 (ENU) Used: 1033 (ENU)
NVidia
LogicalGpu: 0, PhysicalGpuCount: 1

NVIDIA GeForce RTX 3060,Pos: 0, ID: 620957918 | 1081283672 | 9475 | busId: 33 | busSlot: 33
Total PhysicalGpuCount: 1

nvidia: found 1 logical devices
nvidia: found 1 physical devices
NrGpu: 0,  SensorNr: 0, TCount 1 - TMax: 127,  Temp: 46 nvidia: Temperature 46 °C, max Temperature 127 °C

nvidia: NVIDIA GeForce RTX 3060
AMD_ATI
Try to load Library: atiadlxx.dll
Try to load Library: atiadlxy.dll
Library not found

Vendor ID: AuthenticAMD
Vendor ID: AMD
HighestIntegerValue: 0000000D - Processor Signature: 00830F10
Misc. info: 20300800
Feature Flags1 FED83203
Feature Flags2 178BFBFF

Processor: AMD Ryzen Threadripper 3960X 24-Core Processor                 
Processor: Family: 17h, Model: 31, Stepping: 0
Processor: Max Case Temperature: 70.0 °C, Max Power: 0.0 W

Core Temperature: 0 °C, Raw Data: 0
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,|0;1;2;3
;4;5;6;7;8;9;a;b;c;d;e;f;10;11;12;13;14;15;16;17;18;19;1a;1b;1c;1d;1e;21
;

Status: 1, Bus: 0, Device: 24, Function: 2, F2x94, DRAM CHR:01450000
Status: 1, Bus: 0, Device: 24, Function: 2, F2x64, HTC:00000000
Status: 1, Bus: 0, Device: 24, Function: 2, F2xE8, NBridge:00000000
Status: 1, Bus: 0, Device: 24, Function: 3, F3xE4, Temperature (F):00000000
Status: 1, Bus: 0, Device: 24, Function: 3, F3xA4, Temperature:00000000
Status: 0, Bus: 0, Device: 31, Function: 2, F2x94, DRAM CHR:00000000
Status: 0, Bus: 0, Device: 31, Function: 2, F2x64, HTC:00000000
Status: 0, Bus: 0, Device: 31, Function: 2, F2xE8, NBridge:00000000
Status: 0, Bus: 0, Device: 31, Function: 3, F3xE4, Temperature (F):00000000
Status: 0, Bus: 0, Device: 31, Function: 3, F3xA4, Temperature:00000000
This Processor has 32 cores and  2 temperature sensors.
Regulator threads used for the CPU: 16

BOINC:
wuprop.boinc-af.org
www.primegrid.com
www.sidock.si_sidock
www.worldcommunitygrid.org

Gpu's found: 1, bus slots used by BOINC: 33 -1 -1 -1 -1 -1 -1 -1

The temp shown in Throttle is 15 degrees Celsius. HWinfo is saying around 55 degrees Celsius.

Edit:

• I read some more on this forum and understand now that the new AMD CPU's are kind of closed source.
• For HwiNFO to work in Throttle you need to enable the Shared Memory Support. In the free version it's however only for 12 hours.

So I answered my own question

In 1.64 the ?? should be gone.

Confirmed, thanks for the quick fix!

The project url should match to what you find in BoincTasks Projects -> Properties "Master URL"

hmm, all stat sites don't show ?/? for the projects I mentioned, so they must be using something else. Probably something like the "Master URL"-Property.
Can't BT also use this Property?

I'm running BOINC 7.2.42 and BT 1.63. With the default settings of BT I see only ?/? at the columns  "Project rank" and "Team rank"
As explained in the help for the Expert settings for BT, I need to fill in my CPID by hand, because only with BOINC 7.4.13 and newer the projects will provide the CPID.
Doing so still gives ?/? at (at least) the following projects:
- boincsimap at http://boincsimap.org/boincsimap/
- Mindmodeling@Beta at http://mindmodeling.org/
- LHC@Home 1.0 at http://lhcathomeclassic.cern.ch/sixtrack/

All these projects have changed their url during the last year or so. As earlier discussed with Fred we concluded that the old url for these projects was used by BT. I kind of expected that this was fixed in BT 1.63, but apparently not?

Doh! Of course it are the CPID's of the connected computers, sorry about that
So you could start using the CPID of the connected computer. If that gives no info, use the CPID(s) from the expert tab?

If the computer where BT is installed is not used for crunching, there is no computer CPID...

Just to be sure: you are using the CPID of the BOINC-user at the expert-tab, not the CPID of the host?
Because the CPID of the host can change often...

Yes, i did fill in my CPID (36a6d488ab7a8300adc114ce5af660c4) in the expert tab, it is the same in all projects I crunch for.
But for some projects the ?/? is still shown and for others the correct positions:

Project                           Project position Team Position  Team
boincsimap                        ?/?              ?/?            BOINCstats
CERNVM/Vboxwrapper Test Project   ?/?              ?/?            BOINCstats
Docking                           ?/?              ?/?            BOINCstats
LHC@home 1.0                      ?/?              ?/?            BOINCstats
MindModeling@Beta                 ?/?              ?/?            BOINCstats
NumberFields@home                 727/3.256        10/10          BOINCstats


Did a little debugging... Looks like BoincTasks is using an old (outdated) project-url for the projects showing ?/?.

Example: found for SIMAP the old url in file [CPID].xml in the xml-folder. After changing it to the current url http://boincsimap.org/boincsimap/ and restarting BT:
boincsimap   172/34.486   13/52   BOINCstats

Probably an easy fix (always use recent project-url for creating [CPID].xml) for the next version of BT?

Definitely a problem with firewall. Uninstalling F-secure (and disabling Windows Firewall) did the trick. BAM! makes the connection and all the ready tasks from the projects are reported.
Case closed!
Reminder to myself: do install a proper firewall

Tried it with BM, same result, but thanx for the suggestion.
Found another thread at SIMAP, claiming it could be the F-Secure Firewall. Will try to replace F-secure with Avira, to see if that's making a difference....

Nah, Willy said it's something with the rpc on the host. Still debugging...

Having trouble with adding the BAM! Accountmanager on the host where Boinctasks (1.35) is installed:
apr2011
496         1-7-2012 20:43:43   [http] HTTP_OP::init_post(): http://bam.boincstats.com/rpc.php   
497         1-7-2012 20:43:43   [http] HTTP_OP::libcurl_exec(): ca-bundle set   
498         1-7-2012 20:43:43   Contacting account manager at http://bam.boincstats.com/   
499         1-7-2012 20:43:43   [http] [ID#0] Info:  About to connect() to bam.boincstats.com port 80 (#0)   
500         1-7-2012 20:43:43   [http] [ID#0] Info:    Trying 217.67.244.101...   
501         1-7-2012 20:43:43   [http] [ID#0] Info:  Connected to bam.boincstats.com (217.67.244.101) port 80 (#0)   
502         1-7-2012 20:43:43   [http] [ID#0] Info:  Connected to bam.boincstats.com (217.67.244.101) port 80 (#0)   
503         1-7-2012 20:43:43   [http] [ID#0] Sent header to server: POST /rpc.php HTTP/1.1
   
504         1-7-2012 20:43:43   [http] [ID#0] Sent header to server: User-Agent: BOINC client (windows_x86_64 7.0.28)
   
505         1-7-2012 20:43:43   [http] [ID#0] Sent header to server: Host: bam.boincstats.com
   
506         1-7-2012 20:43:43   [http] [ID#0] Sent header to server: Accept: */*
   
507         1-7-2012 20:43:43   [http] [ID#0] Sent header to server: Accept-Encoding: deflate, gzip
   
508         1-7-2012 20:43:43   [http] [ID#0] Sent header to server: Content-Type: application/x-www-form-urlencoded
   
509         1-7-2012 20:43:43   [http] [ID#0] Sent header to server: Content-Length: 28947
   
510         1-7-2012 20:43:43   [http] [ID#0] Sent header to server: Expect: 100-continue
   
511         1-7-2012 20:43:43   [http] [ID#0] Sent header to server:
   
512         1-7-2012 20:43:44   [http] [ID#0] Info:  Done waiting for 100-continue   
513         1-7-2012 20:48:49   [http] [ID#0] Info:  Operation too slow. Less than 2 bytes/sec transferred the last 300 seconds   
514         1-7-2012 20:48:49   [http] [ID#0] Info:  Closing connection #0   
515         1-7-2012 20:48:49   [http] HTTP error: Timeout was reached   
516   http://bam.boincstats.com/   1-7-2012 20:48:50   Message from account manager: transient HTTP error   
The error is a bit cryptic to me:

Could this be BT-related?

Edit: I've also posted this on boincstats.com to see if it is BAM-related...

V22 crashed after using the long term history, V23 (as of this moment after using 5 minutes) not. Very nice feature, I would give 2 thumbs up if possible!

Just to be sure it's not a firewall-problem: have you tried to disable firewall on all 3 rigs and then to connect through BT or BOINC-manager?